Guide To Install Mavericks with Clover Bootloader

[nhieu9200]

Hi nguyenmac, How to use Recover partition if i set boot time = 0?
And will Mavericks + Clover work well after recover ?

 

[Loreno10]

Sorry for a stupid question, but how to change Clover theme?

 

[nguyenmac]

Sorry for a stupid question, but how to change Clover theme?

Open config.plist then set Theme in GUI > Theme.

 

[rob1980]

it does take a while on first boot / during install.

If its taking far too long, say over 10 minutes (should be less than that in reality) then try booting with flag -v, see what message is displayed where it stops

edit*

chances are, you have installed ok, but due to different hardware, will need to use some flags to get into install to complete DSDT, kexts etc.. booting with -v will more than likely give one of the experts the knowledge of what flag you'll need..

 

[skyline]

My laptop hp elitebook 8470p after installing OS X Mavericks, everything works fine but my sound volume is quite low, any way to make it loud as on Windows, please help! Thanks All

 

[asiBenlik]

Yes, I also have the same problem.
A warming up too much.


HP ProBook 4540s i5

 

[nguyenmac]

Yes, I also have the same problem.
A warming up too much.


HP ProBook 4540s i5

Same idea, we have to tune up the AppleHDA patch, but I have no clue how to do it.

I just buy a mid-range DAC for music.

 

[shandoosheri]

Hi, I have a probook 4530s and after following all the steps for the installation. I can't seem to have the recovery partition. The phase 1 of installation install mavericks to my target partition directly instead of extracting data to the usb installer partition. I don't know what I did wrong. Any help would be appreciated

Thank you in advance

 

[RehabMan]

Hi, I have a probook 4530s and after following all the steps for the installation. I can't seem to have the recovery partition. The phase 1 of installation install mavericks to my target partition directly instead of extracting data to the usb installer partition. I don't know what I did wrong. Any help would be appreciated

Thank you in advance

Did you create your OS X installer partition with Unibeast or with 'createinstallmedia'?

No recovery partition with Unibeast style creation. Is possible only with 'createinstallmedia'...

 

[zolo185]

Have 4530s and followed as far as i could get in the first post. Made the USB but everytime i try to boot it gives me a KP with AppleIntelCPUPowerManagment. :/ i did the USB right i feel like. i have the a7k06ut 4530s and i did the usb with 2 partitions, 300 mb ms-dos (clover) and >7gb mac os journaled and moved the right files into (clover) and ran the command with out issue for the install partition just when i try to boot i get a KP everytime