My First G5 Case-Mod

[vinu.snake]

do i something wrong because there is not really feedback in my Thread ....?

can i change titel of thread?

greetings

 

[neilhart]

do i something wrong because there is not really feedback in my Thread ....?

can i change titel of thread?

greetings

Marcel if you ask questions then you might get more responses.

Many people follow projects and do not comment until the project is completed. Also lately fewer people are leaving comments for some reason.

All of that aside, I have been following your thread and I think that you are on track with good ideas. Keep up the effort as a G5 PM hack is a pleasure to own.

Good modding,
neil

 

[Welsi]

I've copied your posts with the fans and the ratiniert me! I nowhere a manual for it that you can Found rebuild the fan to a normal fan connector!
Now I have to ask how did you hinbekommen your fan control do you have for me somewhere a chart or diagram and lends much EVEN. A shopping list for what the parts are or the name of it?

 

[vinu.snake]

hey neil ... thanks .. i give my best to get the best result in modding

can u say me what sounddriver i need to get the Realtek ALC883 from my ASUS working because the correct nr is not in the list of multibeast? (i a littlebit older the MB) ... or must i ask this kind of question in another place in forum?.

greeting

 

[vinu.snake]

Hey Welsi ... I have build up the Fancontroller with simple parts from electronicstore

1x PCislot Fancontroller (for the weel) i buy in conrad electronics
5x Fanpins male i buy in internet
1x Platine with kupperstipes in back i buy in conrad electronics
__ little peace of 1mm² cable i buy in conrad electronics


then i make everything on the platine and cut the kupperband on some places


greeting

 

[minihack]

Hey Marcel,
As Neil says, just because comments are few doesn't mean people aren't reading….
I am always watching these threads with interest and if you want any help or advice, there are a lot of people here to ask. Also agree that maybe people keep their comments until they can see a near finished product as then it is easier to see what is happening.
I also think it is true that maybe fewer people now are active posting - to be honest I am not sure why, because there are certainly still a lot of people out there doing these mods! Maybe it just seems that way because the forum is now so well organised into different groups (cube,G5,Pro, G4 etc etc) that instead of clicking on a general link and seeing a lot of different mods - which I liked - it takes more effort to keep track of everything.
Keep it up!

 

[neilhart]

hey neil ... thanks .. i give my best to get the best result in modding

can u say me what sounddriver i need to get the Realtek ALC883 from my ASUS working because the correct nr is not in the list of multibeast? (i a littlebit older the MB) ... or must i ask this kind of question in another place in forum?.

greeting

Yes your motherboard is a bit older and support for the audio is not listed in Multibeast. I did find this thread: http://www.tonymacx86.com/audio/21080-alc-883-microphone-working.html At the bottom of post one is a zipped attachment with a kext that may work today. Try it and if it does not work I would start down the list of voodoo audio kexts found in the universal section of Multibeast Audio drivers.

And you could always use a USB Audio module as these are fairly low cost and have remarkably good sound output.

Good modding,
neil

 

[Welsi]

Hey Welsi ... I have build up the Fancontroller with simple parts from electronicstore

1x PCislot Fancontroller (for the weel) i buy in conrad electronics
5x Fanpins male i buy in internet
1x Platine with kupperstipes in back i buy in conrad electronics
__ little peace of 1mm² cable i buy in conrad electronics


then i make everything on the platine and cut the kupperband on some places
View attachment 97157

greeting

Hi vinu thank you for this thread but i dont understand the diagram kann you explain this picture a little bit Thanks

 

[vinu.snake]

Hi vinu thank you for this thread but i dont understand the diagram kann you explain this picture a little bit Thanks

The Diagramm Shows u the Platine with kupperbands on back and how u must connect and cut the stripes. And U need 12V+ and Ground from a MolexConnector to run the Fancontroller. Control in and out is the weel to change speed. The Quares are the fanconnectors.



i hope i can help u

Greetings

 

[vinu.snake]

Yes your motherboard is a bit older and support for the audio is not listed in Multibeast. I did find this thread: http://www.tonymacx86.com/audio/21080-alc-883-microphone-working.html At the bottom of post one is a zipped attachment with a kext that may work today. Try it and if it does not work I would start down the list of voodoo audio kexts found in the universal section of Multibeast Audio drivers.

And you could always use a USB Audio module as these are fairly low cost and have remarkably good sound output.

Good modding,
neil

Thank u Neil i will try this ...

greetings