OS X 10.8.2 Update

[Emu5050]

Article: OS X 10.8.2 Update

Even booting with -x always stuck at white screen (ATI HD6670) because the new ati kexts...

Before update, I saved a copy of the folder Extensions of my working 1.8.1 in other partition. Started from Windows 7 partition (McDrive installed) and copy-pasted my previous AtiController6000.kext and AppleHDA.kext and AppleACPIPlatform.kext (allways saved from previous version) in S/L/E.

NO OemSMBIOS.kext removed.

Rebooted with Unibeast usb to repair permissions. Finally rebooted with UseKernelCache=No and all worked like a charm...

Even if you don't save your previous ACPI kext (bad done BTW) you can download from here (attached)

Hope it helps.

B.R.

Good WORKING THANK YOU

 

[bairda]

Article: OS X 10.8.2 Update

I am in same boat. I have GA-Z77X-UP5 TH and everything is great, except no audio. Followed instructions to install the Realtex ALC8XX without DSDT: ALC898 and no luck. In the system report I see the Intel High Definition Audio and all the connectors (line output) but it doesn't show in the sound devices.

Anyone help? I am on the latest bios for the board and don't have any other issues. It worked before the update.

Thanks,
-Alex-

I fixed the audio by deleting the AppleHDA.kext, and any and all of the HDAEnabler8xx.kexts from the system/library/extensions directory. BEFORE I rebooted I made sure to use Multibeast to install the proper Realtek Audio (898) for the Z77x-UP5. Then reboot and all is good.

Thanks,
-Alex-

 

[amitsadana]

Updated From 10.8.1 to 10.8.2 combo Update
Running everything great on my Asus p5kpl-cm , Nvidia 8400Gs
No need to update any sound or Ethernet driver just reeboted with nv_disable=1 flag and updated Graphics driver.
Running Excellent..

 

[Say Heading]

Article: OS X 10.8.2 Update

I don't have a Plugins folder in FakeSMC.kext file but my system still keeps KP'ing at OemSMBIOS. Any suggestions on how to fix this?

I think the reason why this happens could be that you haven´t been booting with -x as you removed that plugin.
It happened to me during a clean unibeast install of 10.8.2 when I decided to get rid of the plugin right after I had installed fakeSMC and it´s plugins with multibeast - without intermediate reboot with -x.
Thereafter it was still kept in backtrace although it was not present in S/L/E/FakeSMC...

So what helped me was to reinstall FakeSMC and it´s plugins again - reboot normally just to make shure it will keep it in backtrace again - reboot again with -x and delete the plugin - reboot normally. Et voila...

 

[gino8080]

Article: OS X 10.8.2 Update

...

UPDATE: Also had to use the DVDFramework playback patch for Dvd player

please can you explain better?

My DVD player crashes, is the only app that doesn't work please help!

thanks

 

[kermit1219]

Any idea when there will be an "official" tonymacx86 Guide? I will wait until then, if there is one in the works.. keep up the great work guys!

 

[origin2000]

Got grey screen with endless spinning wheel here too. Booted off my backup install and renamed AppleRTC.kext to AppleRTC.kext.old to resolve the issue. Lost audio as well.

Gigabyte Z77X-UD5H
16GB DDR3
Asus EAH 5870 1GB ATI Radeon Graphics

 

[akadigital]

I got the spinning apple screen from built in updater.. went back to 10.8.1, installed my old kexts file everything is back. Will try again after next week... no deadlines..

 

[eirikandre]

Article: OS X 10.8.2 Update

Updated fine from 10.8.2 (12C53)

Installed Update (combo) rebooted with -f -x to avoid FakeSMC.kext/Contents/Plugins/OemSMBIOS.kext Panic

Used KextBeast to replace:

AppleACAPIPlatform.kext (to prevent OEMSMBios Panic and still be able to use smbios.plist to set your system info/serial)
AudioHDA.kext (http://www.tonymacx86.com/audio/67763-ml-optimized-realtek-applehda-preview-alpha.html)

Re-enabled TRIM support for non Apple SSD's in IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext

Make backup:

sudo cp /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage.original

Enable TRIM:

sudo perl -pi -e 's|(\x52\x6F\x74\x61\x74\x69\x6F\x6E\x61\x6C\x00{1,20})[^\x00]{9}(\x00{1,20}\x4D)|$1\x00\x00\x00\x00\x00\x00\x00\x00\x00$2|sg' /System/Library/Extensions/IOAHCIFamily.kext/Contents/PlugIns/IOAHCIBlockStorage.kext/Contents/MacOS/IOAHCIBlockStorage

I have attached the above mentioned AppleACAPIPlatform.kext that allows smbios.plist to work without OEMSMBios Panic.
Found here: http://www.insanlynac.com/forum/index.php?showtopic=282162&view=findpost&p=1852962

After Auto update, I got the evil spinning wheel when boot. Glad this worked for me

 

[lavertyg]

Have just updated to 10.8.2 on my ASUS P8P67 Pro (Rev 3.1). After reading most of the comments I decided to go with a straightforward "System Update" from the app store. After a few tense seconds waiting for the spinning wheel to stop spinning, I booted straight into my upgraded Mountain Lion with ease. The only settings I had to redo were the ticks in the boxes in Multibeast for ALC8xxHDA, AppleHDARollback and ALC892. If anything my new system is working better than before, and the previous problems I had with a hissing sound on my audio has gone !