Audio - 12/“C” value has 3 properties. I missed that.
FileVault is a no go with OCLP, because of the patched root volume/SIP, I read the guide again.
- I think the “early” days with OC on HS just not allowed to use the FileVault something, so never face the cursor issue.
- I assume you familiar with the OC FileVault
instruction, furthermore i looked into the
Manual, and if you “command+F “ for “FileVault” 4th of 10th result is like the exact problem you said.
- a part from the manual “This can affect OpenCanopy and FileVault 2 user interface responsiveness and loading times. Increasing the polling periods can reduce the impact.”
Mojave, Catalina - thanks, i would looking for it.
Sleep/Wake - as mentioned above, under the OCLP issues, suggest to try 11.2.3. I don't remember trying to get it to work.
Backlight - of course you did, that just a 101 question, which is very helpful at certain times. Like me with “applbkl”.
applbkl - thanks for telling me, I fixed it. Almost funny, when you rely on others, you have the solution, just misspelled a word.
in Terminal - “ioreg -l | grep ApplePanel”
- the curve line is 0, 24, 39, 58, 82, 113, 150, 196, 252.
- 0 to 8 level.(I don't use it above)
“applbkl” value was no need until 11.2.3. It took a lot of time when i finally gave it a try, because it wasn't that obvious what i
need.
link (bottom of page)
This patch is also controlling the screen PWM under the hood. On Windows/Linux except full brightness you get a pretty bad flickering, if you haven’t noticed before. On macOS all brightness level higher than 240 Hz frequency which is almost good.
- Slo-mo 720p/240 sampling. You can check any other light with this sort of “technique”.
UEFI Native (without CSM) - i don't have much to say about, changed the BIOS/Custom Boot settings and it's working.
- Maybe some of the problems I encountered before were fixed in time.
- What is your BIOS settings?
No problem, on my pleasure!
I was thinking the same thing for your EFI. Happy Holidays!