Intel NUC 10 Frost Canyon

[xelanaiznac]

Here you go I have it set for AMD rx 5700 xt in DeviceProperties.

Here you go I have it set for AMD rx 5700 xt in DeviceProperties.

sorry, how to set it for 6800xt instead of 5700?

 

[zappy39]

sorry, how to set it for 6800xt instead of 5700?

Try using Hackintool https://www.tonymacx86.com/threads/release-hackintool-v3-x-x.254559/ to Export the PCI Deviceproperties then copy and paste the AMD Gpu Properties

 

[xelanaiznac]

Try using Hackintool https://www.tonymacx86.com/threads/release-hackintool-v3-x-x.254559/ to Export the PCI Deviceproperties then copy and paste the AMD Gpu Properties

thank you, I will try !

 

[p4tpr0]

I've tried the standalone installer but the result is exactly the same

Ok, after upgrading Opencore and Kext the latest Security update went OK.

 

[Leesureone]

hi.. I need help.. I had Intel NUC 10gen i5, razor core x and Asus tug gaming rx6900xt.. I used open core 0.74... so, I cannot run my external graph. card.. can someone help me.. what should do in bios config plist etc..

Please don't double post, maybe someone can help win the other thread. Make sure you have Thunderbolt Security turned off in the bios and set Thunderbolt Display as choice #1, then if your graphics card is natively recognized it should work.

Another possible issue is the power supply in the razor core is only rated at 650 watts and an RX6900XT they recommend an 850 watt PSU minimum.

 

[Leesureone]

Hi.. tnx for answ.

recommend is for overall system not for card.. card need only 300W …

card worked only whit hdmi cabel, wiht DP not.. i saw screen in arangement but monitor was still black(off)

That happens, sometimes its the cable, sometimes the monitor sometimes its needing to configure the display settings.

 

[Leesureone]

Try all.. do u think that is problem with hdcp?

Doubt it

 

[Leesureone]

Did u see link in the prev. post

Yes, reinforced what I was saying about cables and or the monitor possibly being the issue as much as HDCP was mentioned. Never, ever heard that being an issue and I've been following the other thread you posted in since it started.

 

[Leesureone]

How can do that my graphics card is natively recognized?

Because its not Windows or linux, hardware does not always perform as expected with Hackintoshs. For example some models of 6900XT do not work without some additional work. If you were as involved with this site as I am you would have read many, many examples of that behavior with different hardware.

Have you tried different cables or a different monitor? Have you tried adjusting your settings on the monitor?

 

[Leesureone]

i can not belive.. now worked.. i tried again.. ok.. tnx.. but now i ned finish and do, that my nuc use only thunderb. and external graph. how can do that switch on external graf

How do you enable external graphics? Change the display option in the bios to make thunderbolt first.