Contribute
Register

Intel NUC 10 Frost Canyon

devildothack said:
I tried this EFI and it works better than the one I had. Nice! Thanks!

I started from scratch again since I been having issues here and there with Catalina. Did a fresh install 10.15.7 (19H15), use this EFI and it booted with no issues.

With my previous, custom EFI (I grab a couple of EFI in this post since way back last year)...I had two issues mostly: Never was able to get my eGPU Radeon 5700 via TB3 and SD card to work...I'll test those with this EFI..

Again, thanks for the link!! Good stuff!!
Click to expand...
devildothack did you get your egpu working? I only got my egpu working using my own ssdt from windows ssdtime Saffire rx 5700 xt and using agdpmod=pikera.If I use any of the ssd-thunderbolt.aml=no gpu controller loading. pierpaolo2395 EFI works great but gpu controller still won't load.by using my ssdt awac ec hpet plug usb-reset it works every time plus sleep works.
 
zappy39 said:
devildothack did you get your egpu working? I only got my egpu working using my own ssdt from windows ssdtime Saffire rx 5700 xt and using agdpmod=pikera.If I use any of the ssd-thunderbolt.aml=no gpu controller loading. pierpaolo2395 EFI works great but gpu controller still won't load.by using my ssdt awac ec hpet plug usb-reset it works every time plus sleep works.
Click to expand...

Nope, when I plug it after Mac OS loads up..it freezes completely. If I restart with the eGPU connected, I get a kernel panic with this the above EFI.
 
devildothack said:
Nope, when I plug it after Mac OS loads up..it freezes completely. If I restart with the eGPU connected, I get a kernel panic with this the above EFI.
Click to expand...
yes if I use the above efi it won't even load the gpu-controller if I remove SSDT-NUC10.aml and use my own ssdt
from win10 ssdtime and agdpmod=pikera it works also its showing the proper PCIe Lane Width x4.on my Elitebook it shows PCIe Lane Width x2 should be x4
 
Last edited:
zappy39 said:
yes if I use the above efi it won't even load the gpu-controller if I remove SSDT-NUC10.aml and use my own ssdt
from win10 ssdtime and agdpmod=pikera it works also its showing the proper PCIe Lane Width x4.on my Elitebook it shows PCIe Lane Width x2 should be x4
Click to expand...
hi. could you please share your efi with egpu working please?
 
p4tpr0 said:
I've tried the standalone installer but the result is exactly the same :(
Click to expand...
Ok, after upgrading Opencore and Kext the latest Security update went OK.
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top