- Joined
- Nov 9, 2019
- Messages
- 5
- Motherboard
- Asus ROG STRIX Z390-E GAMING
- CPU
- i5-9600K
- Graphics
- GTX 1060
I have the same issue with both the NUC8 and the 7 models I have using Opencore. In the OpenCore laptop guide, which is fair to say the NUCs are more than a desktop, it says card readers generally do not work. Their suggestion is to buy a USB Card Reader being they are relatively inexpensive. I should probably remove the kext for it.
FYI, even with clover the reader can be flakey or at least that has been my experience. The trick may be if it’s PCI based or not, see below from the guide.
Built in SDCard Readers
If you have an SDCard reader that's connected through an internal USB hub, it's probably not going to work. Do yourself a favor if you need SDCard support and buy an inexpensive reader. If your SDCard reader is PCI based there is a small chance that it will work in macOS, but you're probably going to want to fake the ID so it appears as a native reader to the operating system.
Thanks for your fast answer. I have been searching around and found a newer version of sinetex kext. Replacing the one in the EFI folder with the release version inside Sinetek-rtsx-2.2-macOS-10.13.zip from cholonam repo works! (https://github.com/cholonam/Sinetek-rtsx/releases)