Contribute
Register

[Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc)

Are you just using my config.plist or the whole Clover EFI folder? Sleep/Wake are typically a related to USB port Limit patching gone wrong or being incomplete. I've got an SSDT-UAIC.aml that works for my i5 that is part of the EFI folder you can try first.

Thanks for your thoughtful reply. Actually I want to mention to Sleep/Wake function, not Hibernation (sorry about that). I will replace the SSDT-UAIC.aml and post my result soon.
 
WOW, for the first time ever, my NUC8i5BEH goes to sleep and wakes using USB-C to DP cable!
I didn't check the audio yet or other things - but sleep works!!!
THANK YOU!!! :clap::headbang:

Was it all caused because the USB SSDT?

I've checked also the audio from the front audio jack - works excellent!
NUCEFIOC5.8.2 - is the best version yet for my NUC8I5BEH :)

BTW - I saw online that Intel Wi-Fi 9560 does works on Catalina 10.15.
I didn't try it yet because the lack of my experience, and I'm not sure if it's allowed to paste a link to the guide on YouTube here, is it allowed?

Thank you
 
I've checked also the audio from the front audio jack - works excellent!
NUCEFIOC5.8.2 - is the best version yet for my NUC8I5BEH :)

BTW - I saw online that Intel Wi-Fi 9560 does works on Catalina 10.15.
I didn't try it yet because the lack of my experience, and I'm not sure if it's allowed to paste a link to the guide on YouTube here, is it allowed?

Thank you
Here are the general rules:
General Rules
  • The tonymacx86 community does not condone piracy or the use of illegally acquired software. Any use, discussion, links to or mentions of pirated or illegal software will result in an instant permanent ban and account deletion without warning or notice. Examples of piracy are pre-built VMs, distributions, disk images, iso files, non-Apple computers purchased with macOS pre-installed, hacked or modified installers and cracking or unlocking software. Piracy is ILLEGAL and NOT TOLERATED.
  • Discussion of illegal activities such as software or music piracy and other intellectual property violations are not allowed and will result in a permanent ban from this community.
  • Building a hackintosh is not illegal as long as you have legally acquired macOS. However, installing macOS on non-Apple hardware is a violation of Apple’s EULA. In most countries, violating the terms of the EULA is not illegal as it is a contract. You are advised to consult your local laws before continuing.
  • Any posts referencing unapproved installation software, methods, or websites will be deleted. Approved installation methods are as follows: iBoot, UniBeast, createinstallmedia, gibMacOS and OpenCore.
  • This community does not support installation of macOS on AMD or Atom CPUs nor hypervisors other than VMware Fusion. Any post requesting help for or asking about these will be deleted.
  • Discussion of pre-release software (such as macOS Public Beta software builds) from the free Apple Beta Software Program is encouraged.
  • Software released thru the Apple Developer Program is restricted to paid developer members only and restricted by NDA. As such, this site does NOT support installation of any software released under this program nor discussion of it or any non-public information developers have access to.
  • All software and DSDTs created by tonymacx86 LLC are copyrighted and may not be redistributed or hosted on any other site or file sharing service.
 
I am trying to migrate my Clover data(Serials+UUID) so that I can just boot either bootloader.

@Leesureone could you kindly check if this small mapping is correct? To my understanding those are all values to be changed when using your NUC8EFIOC5.8-2.zip (coming from CATNUC8EFI)

Thanks!

Clover SMBios OC Section Platforminfo->Generic
Serial Number (12digit) MLB
Mac of eth0 (6) ROM
Board Serial Number (17digit) SystemSerialNumber
SMuuiD (Hackintool: System ID) SystemUUID
 
I am trying to migrate my Clover data(Serials+UUID) so that I can just boot either bootloader.

@Leesureone could you kindly check if this small mapping is correct? To my understanding those are all values to be changed when using your NUC8EFIOC5.8-2.zip (coming from CATNUC8EFI)

Thanks!

Clover SMBios OC Section Platforminfo->Generic
Serial Number (12digit) MLB
Mac of eth0 (6) ROM
Board Serial Number (17digit) SystemSerialNumber
SMuuiD (Hackintool: System ID) SystemUUID
Pretty much, here is where the info is in clover including the UUID.
Symbios.png

Here is where the ROM or MAC address is. There are a series of colons operating the value you eliminate and then add like this including the brackets <12345678>

ROM.png
 
I've checked also the audio from the front audio jack - works excellent!
NUCEFIOC5.8.2 - is the best version yet for my NUC8I5BEH :)

BTW - I saw online that Intel Wi-Fi 9560 does works on Catalina 10.15.
I didn't try it yet because the lack of my experience, and I'm not sure if it's allowed to paste a link to the guide on YouTube here, is it allowed?

Thank you

If you'll look for Intel Wifi kext For Hackintosh Catalina 10.15 you can find a video from 2 days ago that explains how it's possible to enable the wifi and there kext are in the description of the video.
Maybe it is also possible with the NUC?
 
If you'll look for Intel Wifi kext For Hackintosh Catalina 10.15 you can find a video from 2 days ago that explains how it's possible to enable the wifi and there kext are in the description of the video.
Maybe it is also possible with the NUC?
I looked and I guess I found the video but not for the 9560. There is a thread here that there has been some success
 
Curious, the page 90 now is missing SSDT-UIAC.aml and SSDT-DDA, I know the first one not needed due to the USB kexts, what about the DDA? was present on OC 5.7.
 
I looked and I guess I found the video but not for the 9560. There is a thread here that there has been some success

It's a 02:49 minutes video that says it is also for 9560 (from the channel "PC Video / Games Channel")
 
Back
Top