- Joined
- Aug 3, 2017
- Messages
- 15
- Motherboard
- Asus Z170I
- CPU
- i7 6700K
- Graphics
- << need model # >> See Rules !!
- Mac
- Classic Mac
- Mobile Phone
In my build (running since 2017, thanks to the posts here!), I installed a second hard drive that I use to store a cloned copy (using Disk Utility) of my boot drive so that if I mess something up royally, I can simply boot the recovery partition (or a boot USB) and use Disk Utility to "recover" to my latest "backup". I'm running 10.12.6, upgraded from 10.11. About a month ago, my GTX 1050 went bad, and so I switched back to HD530 integrated graphics. This worked fine after a few clover tweaks. However, when I boot off the recovery partition or a boot USB, then at the graphics initialization, I end up with a blank screen - the monitor stops receiving a video signal and goes into power save mode. I can see that the boot seems to continue, and the machine isn't frozen, but it just isn't outputting a video signal. I tried with and without InjectIntel on boot, verbose or not, and it doesn't seem to allow it to boot properly. I made sure Inject ATI and Inject NVidia are both turned off. Thoughts? config.plist attached if that helps. If I can get this fixed, I hope to upgrade to a later version of the OS, since I no longer have the limitation of 10.13.x with the NVidia card.
This is my first post. I couldn't find anything like this in searching the forums, but if I missed a relevant thread, please point me in the right direction. Also, if you need more info about my system, kexts, etc., please let me know. I didn't see anything in the rules about what to include in a new thread (or missed it).
Thanks!!
This is my first post. I couldn't find anything like this in searching the forums, but if I missed a relevant thread, please point me in the right direction. Also, if you need more info about my system, kexts, etc., please let me know. I didn't see anything in the rules about what to include in a new thread (or missed it).
Thanks!!