Gigabyte X299X - Catalina Support

[oli.mathieu]

Hello
I feel dumb
Again a lot of tests (.kext, .efi, SSDT, clover version) with always the same KP
I started with the clover folder and BIOS setting of post #1.
If someone is kind enough to test my Clover folder on his "X299X designare 10G" it would be much appreciated
Thanks in advance

The cpu (i9-9820X) needed Config.plist ➧ ACPI ➧ Patch APIC to be checked.
So now it boots

 

[dolgarrenan]

The cpu (i9-9820X) needed Config.plist ➧ ACPI ➧ Patch APIC to be checked.
So now it boots

I didn't even see you were on a 9820X I guess you must have filled your signature after I asked you right? Expect a OC EFI soon guys

Beware that APIC patched SSDT might be needed to move over to OC, since there is no "patch APIC".

 

[oli.mathieu]

I didn't even see you were on a 9820X I guess you must have filled your signature after I asked you right?

You are right !!!

Expect a OC EFI soon guys

Thanks for that !!
May be you could open a new thread ?

Beware that APIC patched SSDT might be needed to move over to OC, since there is no "patch APIC".

I'm aware. Where can I find some info to make APIC patched SSDT ?
Moving to OC is the future ...
Thanks again !!

 

[dolgarrenan]

Thanks for that !!
May be you could open a new thread ?

I don't think so, this post is good enough to get going and having the ability to choose which bootloader you want to use is a benefit some decide to remove, I'll just append to what we have now and continue editing this post further till is "complete".

I'm aware. Where can I find some info to make APIC patched SSDT ?
Moving to OC is the future ...
Thanks again !!

I opened a post about it some time ago, user @Florin9doi came up with the solution, perhaps he can help out?

 

[oli.mathieu]

I don't think so, this post is good enough to get going and having the ability to choose which bootloader you want to use is a benefit some decide to remove, I'll just append to what we have now and continue editing this post further till is "complete".

Ok I understand

I opened a post about it some time ago, user @Florin9doi came up with the solution, perhaps he can help out?

I'm dumb, i've just read it . That's the post where I found my solution . Duely noted
thanks

 

[Loloflatsix]

Can we hope for a snapshot from your success X299X Designare configuration ?

The cpu (i9-9820X) needed Config.plist ➧ ACPI ➧ Patch APIC to be checked.
So now it boots

 

[oli.mathieu]

Can we hope for a snapshot from your success X299X Designare configuration ?

I still have to work on the 10G ethernet from Intel X550 chipset (like with X299 Sage 10G).
Now I'm using an ethernet 10G PCIe card Working OOB

 

[Loloflatsix]

View attachment 455188View attachment 455189View attachment 455191View attachment 455192
I still have to work on the 10G ethernet from Intel X550 chipset (like with X299 Sage 10G).
Now I'm using an ethernet 10G PCIe card Working OOB

Real nice job and one thing is really true : help and work is the way to achieve
So may be the force with @dolgarrenan on X299X Designare

I was doing caving : unable to boot my GA X299 ultra Gaming on Mojave or Catalina

 

[oli.mathieu]

View attachment 455188View attachment 455189View attachment 455191View attachment 455192
I still have to work on the 10G ethernet from Intel X550 chipset (like with X299 Sage 10G).
Now I'm using an ethernet 10G PCIe card Working OOB

Hardware acceleration fully supported

Intel X550-AT2 Dual ethernet 10G working

 

[Loloflatsix]

View attachment 455211
Intel X550T Dual ethernet 10G working

Even faster with Dual ethernet 10G !
Have you tried to see how the TitanRidge Thunderbolt works like on the X299 Creator ?