Timestamp (process)[PID]
2020-02-26 18:53:57.716855-0800 localhost kernel[0]: (kernel) ACPIDebug: Version 0.1.4 starting on OS X Darwin 19.3.
2020-02-26 18:53:57.717023-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RP05", 0xe00e4000, }
2020-02-26 18:53:57.717163-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UPSB", 0xe0600000, }
2020-02-26 18:53:57.717283-0800 localhost kernel[0]: (kernel) ACPIDebug: { "DSB0", 0xe0700000, }
2020-02-26 18:53:57.717372-0800 localhost kernel[0]: (kernel) ACPIDebug: { "DSB1", 0xe0708000, }
2020-02-26 18:53:57.717458-0800 localhost kernel[0]: (kernel) ACPIDebug: { "DSB2", 0xe0710000, }
2020-02-26 18:53:57.717548-0800 localhost kernel[0]: (kernel) ACPIDebug: { "DSB4", 0xe0720000, }
2020-02-26 18:53:57.717634-0800 localhost kernel[0]: (kernel) ACPIDebug: { "NHI0", 0xe0800000, }
2020-02-26 18:53:57.717722-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RSTR", 0x54039854, }
2020-02-26 18:53:57.717810-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2", 0xe0a00000, }
2020-02-26 18:53:57.717892-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 Initialize"
2020-02-26 18:53:57.718082-0800 localhost kernel[0]: (kernel) ACPIDebug: "ICMBoot"
2020-02-26 18:53:57.718165-0800 localhost kernel[0]: (kernel) ACPIDebug: "ICUP - Our OSUP"
2020-02-26 18:53:57.718247-0800 localhost kernel[0]: (kernel) ACPIDebug: "ICUP - Cmd Ack'd"
2020-02-26 18:53:57.718329-0800 localhost kernel[0]: (kernel) ACPIDebug: "Tbt TWIN set to One"
2020-02-26 18:53:57.718518-0800 localhost kernel[0]: (kernel) ACPIDebug: "Tbt Force Power with FPG0"
2020-02-26 18:53:57.718601-0800 localhost kernel[0]: (kernel) ACPIDebug: "Upstream VID/DID okay"
2020-02-26 18:53:57.718684-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ICME 1", 0xffffffff, }
2020-02-26 18:53:57.718767-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI"
2020-02-26 18:53:57.718849-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure UPSB"
2020-02-26 18:53:57.718932-0800 localhost kernel[0]: (kernel) ACPIDebug: "Wait for link training"
2020-02-26 18:53:57.719014-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure DSB"
2020-02-26 18:53:57.719097-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 0 done"
2020-02-26 18:53:57.719178-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 3 done"
2020-02-26 18:53:57.719261-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 4 done"
2020-02-26 18:53:57.719344-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI Dp 5 done"
2020-02-26 18:53:57.719425-0800 localhost kernel[0]: (kernel) ACPIDebug: "Wait for down link"
2020-02-26 18:53:57.719509-0800 localhost kernel[0]: (kernel) ACPIDebug: { "NHI BAR", 0x54000000, }
2020-02-26 18:53:57.719592-0800 localhost kernel[0]: (kernel) ACPIDebug: "Configure NHI all done"
2020-02-26 18:53:57.719676-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ICME 2", 0x800001a1, }
2020-02-26 18:53:57.719761-0800 localhost kernel[0]: (kernel) ACPIDebug: { "WTLT returns", 0x1, }
2020-02-26 18:53:57.719845-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ICME 3", 0x800001a1, }
2020-02-26 18:53:57.719946-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ICME 4", 0x800001a7, }
2020-02-26 18:53:57.720499-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ISTA 1", 0x800003f0, }
2020-02-26 18:53:57.720620-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ICME 5", 0x800001a7, }
2020-02-26 18:53:57.720742-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ISTA 2", 0x800003f0, }
2020-02-26 18:53:57.720914-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Configuration delay = ", "381 ms", }
2020-02-26 18:53:57.721035-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 PCEU Enter"
2020-02-26 18:53:57.721555-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 PCEU Exit"
2020-02-26 18:53:57.721724-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB _PS0"
2020-02-26 18:53:57.721815-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB PCED Enter"
2020-02-26 18:53:57.722005-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "UPSB.PCED", }
2020-02-26 18:53:57.722150-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-02-26 18:53:57.722302-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-02-26 18:53:57.722428-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-02-26 18:53:57.722578-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-02-26 18:53:57.722707-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-02-26 18:53:57.722861-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-02-26 18:53:57.722990-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-02-26 18:53:57.723122-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on."
2020-02-26 18:53:57.723284-0800 localhost kernel[0]: (kernel) ACPIDebug: "TBT & USBC already on."
2020-02-26 18:53:57.723422-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:53:57.723532-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- restored flag, THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR"
2020-02-26 18:53:57.723794-0800 localhost kernel[0]: (kernel) ACPIDebug: 0x0
2020-02-26 18:53:57.723974-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Wait for config space..."
2020-02-26 18:53:57.724155-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED UPSB- Read VID/DID okay"
2020-02-26 18:53:57.724334-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Link width = ", 0x4, }
2020-02-26 18:53:57.724513-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Link speed = ", 0x3, }
2020-02-26 18:53:57.724691-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Link active = ", 0x1, }
2020-02-26 18:53:57.724868-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Link train = ", 0x0, }
2020-02-26 18:53:57.725047-0800 localhost kernel[0]: (kernel) ACPIDebug: { "ASPM = ", 0x0, }
2020-02-26 18:53:57.725223-0800 localhost kernel[0]: (kernel) ACPIDebug: { "LWRT = ", 0x0, }
2020-02-26 18:53:57.725397-0800 localhost kernel[0]: (kernel) ACPIDebug: { "LWMR = ", 0xa, }
2020-02-26 18:53:57.725572-0800 localhost kernel[0]: (kernel) ACPIDebug: { "THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR = ", 0x0, }
2020-02-26 18:53:57.725749-0800 localhost kernel[0]: (kernel) ACPIDebug: { "TFLG = ", 0x0, }
2020-02-26 18:53:57.725927-0800 localhost kernel[0]: (kernel) ACPIDebug: { "Local4 (LinkIsUp) = ", 0x1, }
2020-02-26 18:53:57.726103-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RetryForLinkWidth = ", 0x0, }
2020-02-26 18:53:57.726281-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RetryForNoLink = ", 0x0, }
2020-02-26 18:53:57.726457-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CanRetry = ", 0x0, }
2020-02-26 18:53:57.726632-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB PCED Exit"
2020-02-26 18:53:57.726718-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Enter"
2020-02-26 18:53:57.726896-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Read Value1", 0x34021, }
2020-02-26 18:53:57.727538-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Write Value1", 0x4034021, }
2020-02-26 18:53:57.727863-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Read Value2", 0x4034021, }
2020-02-26 18:53:57.728040-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-02-26 18:53:57.728215-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Exit"
2020-02-26 18:53:57.728389-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Enter"
2020-02-26 18:53:57.728475-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Read Value1", 0x34121, }
2020-02-26 18:53:57.728653-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Write Value1", 0x4034121, }
2020-02-26 18:53:57.728827-0800 localhost kernel[0]: (kernel) ACPIDebug: { "CRMW Read Value2", 0x4034121, }
2020-02-26 18:53:57.729155-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Success"
2020-02-26 18:53:57.729329-0800 localhost kernel[0]: (kernel) ACPIDebug: "CRMW Exit"
2020-02-26 18:53:57.729503-0800 localhost kernel[0]: (kernel) ACPIDebug: "ICMB Exit"
2020-02-26 18:53:57.755716-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 _PS0"
2020-02-26 18:53:57.755916-0800 localhost kernel[0]: (kernel) ACPIDebug: "Called by macOS first time. No Op."
2020-02-26 18:53:57.760459-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB _PS0"
2020-02-26 18:53:57.760847-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB PCED Enter"
2020-02-26 18:53:55.203483-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCEU DSB2"
2020-02-26 18:53:55.203600-0800 localhost kernel[0]: (kernel) ACPIDebug: "NHI0 PCED Enter"
2020-02-26 18:53:55.329363-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCEU DSB2- Put upstream bridge back into D0 "
2020-02-26 18:53:55.329892-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "NHI0.PCED", }
2020-02-26 18:53:55.330428-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-02-26 18:53:55.331017-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-02-26 18:53:55.331546-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-02-26 18:53:55.332035-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-02-26 18:53:55.332557-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-02-26 18:53:55.332690-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-02-26 18:53:55.332858-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-02-26 18:53:55.332986-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on."
2020-02-26 18:53:55.333098-0800 localhost kernel[0]: (kernel) ACPIDebug: "TBT & USBC already on."
2020-02-26 18:53:55.333207-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:53:55.333313-0800 localhost kernel[0]: (kernel) ACPIDebug: "_PS0 XHC2"
2020-02-26 18:53:55.458547-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED NHI0- restored flag, THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR"
2020-02-26 18:53:55.458700-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED XHC2 - enable GPIO"
2020-02-26 18:53:55.458851-0800 localhost kernel[0]: (kernel) ACPIDebug: 0x0
2020-02-26 18:53:55.459175-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED NHI0- Wait for config space..."
2020-02-26 18:53:55.459483-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED NHI0- Read VID/DID okay"
2020-02-26 18:53:55.459590-0800 localhost kernel[0]: (kernel) ACPIDebug: "NHI0 PCED Exit"
2020-02-26 18:53:55.584435-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "XHC2.PCED", }
2020-02-26 18:53:55.585326-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-02-26 18:53:55.585870-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-02-26 18:53:55.586358-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants on"
2020-02-26 18:53:55.586833-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Enter"
2020-02-26 18:53:55.587161-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-02-26 18:53:55.587285-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB forced on"
2020-02-26 18:53:55.587400-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-02-26 18:53:55.587511-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-02-26 18:53:55.587622-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on."
2020-02-26 18:53:55.587734-0800 localhost kernel[0]: (kernel) ACPIDebug: "TBT & USBC already on."
2020-02-26 18:53:55.587851-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:53:55.712040-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Exit"
2020-02-26 18:53:55.712721-0800 localhost kernel[0]: (kernel) ACPIDebug: { "PCED XHC2- restored flag, THUNDERBOLT_PCI_LINK_MGMT_DEVICE.PRSR", 0x0, }
2020-02-26 18:53:55.712865-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED XHC2- Wait for config space..."
2020-02-26 18:53:55.713445-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCED XHC2- Read VID/DID okay"
2020-02-26 18:53:55.713555-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC2 PCED Exit"
2020-02-26 18:53:55.845000-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RTPC XHC2 called with arg: ", 0x1, }
2020-02-26 18:53:55.845979-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x1, }
2020-02-26 18:53:55.846129-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x1, }
2020-02-26 18:53:57.016745-0800 localhost kernel[0]: (kernel) ACPIDebug: "MUST NHI0"
2020-02-26 18:53:57.016926-0800 localhost kernel[0]: (kernel) ACPIDebug: { "MUST UPSB with arg", 0x0, }
2020-02-26 18:53:57.017041-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB UMPE"
2020-02-26 18:53:57.017889-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:53:57.018249-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:53:57.018794-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:53:57.019147-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:53:57.019738-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:53:57.019934-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:53:57.020053-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:53:57.020169-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:53:57.020285-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RTPC XHC2 called with arg: ", 0x0, }
2020-02-26 18:53:57.020749-0800 localhost kernel[0]: (kernel) ACPIDebug: "_PS3 XHC2, Nothing to do!"
2020-02-26 18:53:57.176542-0800 localhost kernel[0]: (kernel) ACPIDebug: "_PS3 DSB2"
2020-02-26 18:53:57.303175-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2"
2020-02-26 18:53:57.429315-0800 localhost kernel[0]: (kernel) ACPIDebug: "POFF DSB2"
2020-02-26 18:53:57.560144-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2- Put upstream bridge into D3"
2020-02-26 18:53:57.560272-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2- Set link disable on upstream bridge"
2020-02-26 18:53:57.560398-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2- Wait for link to drop..."
2020-02-26 18:53:57.560522-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2- XHC2 not present"
2020-02-26 18:53:57.560647-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB2 - disable GPIO"
2020-02-26 18:53:57.560773-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "DSB2.PCDA", }
2020-02-26 18:53:57.560897-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-02-26 18:53:57.561021-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants on"
2020-02-26 18:53:57.561144-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-02-26 18:53:57.561282-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT forced on"
2020-02-26 18:53:57.561396-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-02-26 18:53:57.561508-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-02-26 18:53:57.561621-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be off"
2020-02-26 18:53:57.561734-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on."
2020-02-26 18:53:57.561846-0800 localhost kernel[0]: (kernel) ACPIDebug: "TBT & USBC already on."
2020-02-26 18:53:57.561959-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:53:57.686483-0800 localhost kernel[0]: (kernel) ACPIDebug: "DSB2 PCDA Exit"
2020-02-26 18:54:31.358737-0800 localhost kernel[0]: (kernel) ACPIDebug: "_E17 Enter"
2020-02-26 18:54:31.358863-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB AMPE"
2020-02-26 18:54:31.358985-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB UMPE"
2020-02-26 18:54:31.359955-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:54:31.360375-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:54:31.360969-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:54:31.361350-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:54:31.361767-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:54:31.361904-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:54:31.362035-0800 localhost kernel[0]: (kernel) ACPIDebug: "XHC MODU"
2020-02-26 18:54:31.362167-0800 localhost kernel[0]: (kernel) ACPIDebug: { "XHC2 MODU - return = ", 0x0, }
2020-02-26 18:54:31.376159-0800 localhost kernel[0]: (kernel) ACPIDebug: "_E17 Exit"
2020-02-26 18:54:33.231007-0800 localhost kernel[0]: (kernel) ACPIDebug: "MUST NHI0"
2020-02-26 18:54:33.231173-0800 localhost kernel[0]: (kernel) ACPIDebug: { "MUST UPSB with arg", 0x0, }
2020-02-26 18:54:42.443360-0800 localhost kernel[0]: (kernel) ACPIDebug: "MUST NHI0"
2020-02-26 18:54:42.443560-0800 localhost kernel[0]: (kernel) ACPIDebug: { "MUST UPSB with arg", 0x0, }
2020-02-26 18:55:00.522326-0800 localhost kernel[0]: (kernel) ACPIDebug: { "RTPC NHI0 called with arg: ", 0x0, }
2020-02-26 18:55:00.523032-0800 localhost kernel[0]: (kernel) ACPIDebug: "_PS3 NHI0, Nothing to do!"
2020-02-26 18:55:00.649834-0800 localhost kernel[0]: (kernel) ACPIDebug: "_PS3 DSB0"
2020-02-26 18:55:00.776363-0800 localhost kernel[0]: (kernel) ACPIDebug: "DSB0 PCDA"
2020-02-26 18:55:00.902839-0800 localhost kernel[0]: (kernel) ACPIDebug: "POFF DSB0"
2020-02-26 18:55:01.030274-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Put upstream bridge into D3"
2020-02-26 18:55:01.030516-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Set link disable on upstream bridge"
2020-02-26 18:55:01.030758-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- Wait for link to drop..."
2020-02-26 18:55:02.043069-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA DSB0- disable GPIO"
2020-02-26 18:55:02.043212-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "DSB0.PCDA", }
2020-02-26 18:55:02.043351-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants on"
2020-02-26 18:55:02.043493-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-02-26 18:55:02.043630-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-02-26 18:55:02.043766-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-02-26 18:55:02.043902-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-02-26 18:55:02.044039-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be on"
2020-02-26 18:55:02.044175-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be on"
2020-02-26 18:55:02.044312-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is on."
2020-02-26 18:55:02.044448-0800 localhost kernel[0]: (kernel) ACPIDebug: "TBT & USBC already on."
2020-02-26 18:55:02.044585-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:55:02.169142-0800 localhost kernel[0]: (kernel) ACPIDebug: "UPSB _PS3 - No Op"
2020-02-26 18:55:02.295568-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 _PS3"
2020-02-26 18:55:02.421085-0800 localhost kernel[0]: (kernel) ACPIDebug: "POFF RP05"
2020-02-26 18:55:02.421219-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Enter"
2020-02-26 18:55:02.547859-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Exit"
2020-02-26 18:55:02.547990-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 PCDA Enter"
2020-02-26 18:55:02.678025-0800 localhost kernel[0]: (kernel) ACPIDebug: "POFF RP05"
2020-02-26 18:55:02.678169-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA RP05- Put upstream bridge into D3"
2020-02-26 18:55:02.678311-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA RP05- Set link disable on upstream bridge"
2020-02-26 18:55:02.678464-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA RP05- Wait for link to drop..."
2020-02-26 18:55:02.678594-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA RP05- No link activity"
2020-02-26 18:55:02.678722-0800 localhost kernel[0]: (kernel) ACPIDebug: "PCDA RP05- disable GPIO"
2020-02-26 18:55:02.678854-0800 localhost kernel[0]: (kernel) ACPIDebug: { "UGIO Called by ", "RP05.PCDA", }
2020-02-26 18:55:02.678982-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - PCI wants off"
2020-02-26 18:55:02.679111-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - NHI wants off"
2020-02-26 18:55:02.679240-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - XHCI wants off"
2020-02-26 18:55:02.679368-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT allows off"
2020-02-26 18:55:02.679497-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB allows off"
2020-02-26 18:55:02.679626-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - TBT GPIO should be off"
2020-02-26 18:55:02.679754-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - USB GPIO should be off"
2020-02-26 18:55:02.679882-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is off."
2020-02-26 18:55:02.680011-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - Make sure TBT & USBC is off"
2020-02-26 18:55:02.680138-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Enter"
2020-02-26 18:55:02.805905-0800 localhost kernel[0]: (kernel) ACPIDebug: "CTBT Exit"
2020-02-26 18:55:02.806113-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO - CP_ACK_POWERDOWN_OVERRIDE not configured, cannot turn off TBT GPIO"
2020-02-26 18:55:02.806292-0800 localhost kernel[0]: (kernel) ACPIDebug: "UGIO Exit"
2020-02-26 18:55:02.932519-0800 localhost kernel[0]: (kernel) ACPIDebug: "RP05 PCDA Exit"