Dell xps 15 9550 4k

[eagor]

I prepared a Clover boot USB following this guide.
Set the required BIOS settings (enabled legacy boot, disabled secure boot, turned off virtualization, etc).
When booting from usb I see the Clover screen, I select 'verbose' option, and try to load macos from install_osx, I get these logs:

and then it stucks with this garbled screen:

I enabled the PciRoot(0)/Pci(0x02,0).DVMT-prealloc patch in my config.plist, but it didn't help.
Any help is much appreciated!

 

[Feartech]

I prepared a Clover boot USB following this guide.
Set the required BIOS settings (enabled legacy boot, disabled secure boot, turned off virtualization, etc).
When booting from usb I see the Clover screen, I select 'verbose' option, and try to load macos from install_osx, I get these logs:

and then it stucks with this garbled screen:

View attachment 446940

I enabled the PciRoot(0)/Pci(0x02,0).DVMT-prealloc patch in my config.plist, but it didn't help.
Any help is much appreciated!

make sure to use a USB2.0 stick

try all your ports on your machine

 

[eagor]

created another boot with new 2.0 usb, tried both ports, but nothing has changed.
Maybe, there's something wrong with my configs?

 

[Feartech]

created another boot with new 2.0 usb, tried both ports, but nothing has changed.
Maybe, there's something wrong with my configs?

maybe...

 

[eagor]

maybe...

If you had time, could you please have a look? (Clover.zip attached to first post). Thanks.

 

[Feartech]

If you had time, could you please have a look? (Clover.zip attached to first post). Thanks.

if you have made changes then you need to upload new files

 

[eagor]

if you have made changes then you need to upload new files

ah, right. sorry.

 

[Feartech]

ah, right. sorry.

you can probably remove:
GenericUSBXHCI.kext

you may want to try a later version of clover:

Clover UEFI Boot Mode v2.4k r4961

Installs Clover bootloader for UEFI booting only to the EFI System Partition of the selected destination drive. Installs AptioMemoryFix.efi, PartitionDxe-64.efi and ApfsDriverLoader-64.efi in /EFI/CLOVER/Drivers64UEFI/. Includes CustoMac default...

www.tonymacx86.com

 

[eagor]

you can probably remove:
GenericUSBXHCI.kext

ok. But could this kext be the reason of the issue?

you may want to try a later version of clover:

I'll try and follow up later. Thanks a lot!
Btw, does it make sense to use the latest version?

 

[Feartech]

ok. But could this kext be the reason of the issue?

maybe, but as it is not required, no need to have kexts that don't do anything and/or could cause issues

I'll try and follow up later. Thanks a lot!
Btw, does it make sense to use the latest version?

you could try newer ones but other's have had issues, the link i gave you should be good to go, or you may have to experiment with other ones