- Joined
- Dec 15, 2018
- Messages
- 32
- Motherboard
- HP Compaq Pro 6300 SFF
- CPU
- i5-3470
- Graphics
- HD 2500 /GT 710
Are you using AppleALC and Lilu to enable audio ? Voodoo ? Patched DSDT ?
Yes, AppleALC and Lilu.
Are you using AppleALC and Lilu to enable audio ? Voodoo ? Patched DSDT ?
If you don't have the latest versions you might try updating to those first. Delete the existing ones and then install newer ones with Kextbeast to /L/E rebuild caches.Yes, AppleALC and Lilu.
1 Specifically which wireless adapter ?
2 Have you connected the BT cable to the USB 2 (media header) ?
3 You can try the following SSDT for USB. Place it in Clover/ACPI/patched folder on your system drive.
Reboot and then test out your GoPro again.
That will work with the correct drivers installed. It's not natively supported.this is the adapter I purchased and tried: EDUP WiFi Adapter ac600Mbps Wireless USB Adapter 5.8GHz/2.4GHz Dual Band 600Mbps USB Adapter 2dBi External
That will work with the correct drivers installed. It's not natively supported.
You could try the TP-link driver (10.13 version) for their WN725N USB dongle. It has the same chip in it.
Great to hear it worked. What kind of speeds are you getting with the EDUP ? Download and upload ?I'm REALLY digging this fast and easy to use hack !
If you don't have the latest versions you might try updating to those first. Delete the existing ones and then install newer ones with Kextbeast to /L/E rebuild caches.
You might look through the audio section of the forum for the troubleshooting ideas. Use "no audio devices" as a search term.I just updated and still same problem. Lilu is 1.3.3 and AppleALC is 1.3.5.
No go. In Preferences -> Sound -> Output is empty.
Any ideas? This was working! Wish I had a backup to go to, but my clone backup is at current level. Damm.
You might look through the audio section of the forum for the troubleshooting ideas. Use "no audio devices" as a search term.
If you're happy with Voodoo just stay with that for now. I'm not sure what the issue is with 10.14.3 but its caused many problems for people with different hardware.On a whim tried VoodooHDA and AppleHDADisabler and boom sound.
And boot time is much faster. There must have been something wrong at boot up. If I wanted to debug, any way to logs?