Contribute
Register

iMac Pro X299 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

Status
Not open for further replies.
perfecto245 said:
Ok Trying

@kgp mate I’ve been trying and trying and I can’t even get the on-board audio to populate. Updated the AppleALC Kext that now shows the audio driver installed as yes for the Radeon.

Nothing to else is showing up.

The SSDT folder is now different from the old single file. Am I to use those individually in the ACPI folder?

Been trying that and also trying to modify the old SSDT.

Loosing hope here.. it wasn’t this difficult when I was on 10.13, don’t get what’s happening.

The RX 580.aml files do not have any entries for vendor -I’d , Device-I’d and compatibility, do I have to manually create those sections?

The ACPI paths match my system as in the RX580 SSDT..

Which is why this is all very confusing.

Could whatevergreen be causing any of this or any kexts in particular?
Click to expand...

SSDTs are macOS independent! Else I neither know what you are referring to not what you are talking about.. How many times I told you already that simple wording leads to nowhere... try to provide useful info and facts on which somebody can work on..
 
whynotzoidberg said:
Hello @kgp

my system runs very stable and corresponds in many parts to yours and I would like to thank you for the fantastic guide.
Here are the Specs:
- Asus X299 Prime Deluxe (Bios 1503)
- i7 I7-7820X
- Sapphire NITRO+ Radeon RX VEGA 64
- GC Titan Ridge

As I said, the system runs very well, but i have still a question.

All Thunderbolt devices are recognized correctly and the hot plugging works reliably, but when I try to connect an eGPU it is displayed under PCI in system profiler, but the driver is not loaded. I tried it with Vega 56, RX 570, RX 560 and always get the same result.

I use a Sonnet Breakaway Box.

Tomorrow I will post sreenshots and an ioreg dump.

And I know you don't have any egpu.

Egpu is not trivial, but maybe you have an idea.
This is a field that would complete the Thunderbolt experience.
Click to expand...

I knew that you would have a question and problem as otherwise very likely you would not have posted here ... :lol:
it is very rare to exclusively receive positive feedback sometimes.

And yes, also your other guess is correct ;).. I do not have any eGPU and ergo, I have to regret but I can't help or assist you in this issue.

Maybe somebody else willing to do it instead?
 
Does anyone know what Wifi/BT chipset the new Mac mini uses? The iMac Pro one is a weird custom one that's not available anywhere. It has the latest Wifi and BT is 5.0.

Also I assume the 10GbE chipset is an Aquantia...
 
kgp said:
SSDTs are macOS independent! Else I neither know what you are referring to not what you are talking about.. How many times I told you already that simple wording leads to nowhere... try to provide useful info and facts on which somebody can work on..
Click to expand...

I’ll send you my SSDT.✌️
 
kgp said:
And what should I do with your SSDT without any other information available?
Click to expand...

@kgp. mate ive attached the IOReg Grabs my config.plist and My modified SSDT. Please let me know if you need grabs of any particualar part of the IORegistryExplorer if i've missed something. + EFI folder. Serials and UUID modified..

Thank you so much again my friend!.
 
perfecto245 said:
@kgp. mate ive attached the IOReg Grabs my config.plist and My modified SSDT. Please let me know if you need grabs of any particualar part of the IORegistryExplorer if i've missed something. + EFI folder. Serials and UUID modified..

Thank you so much again my friend!.
Click to expand...

1.) Remove Shiki.kext, it is already part of Whatevergreen.kext
2.) Remove CAVS -> HDEF ACPI replacement from config.plist
3.) Use actual SSDT files from X299 SSDT Library. Remove SSDT-X299-iMacPro.aml and SSDT-XOSI.aml!
4.) Screenshots of your IOREG are useless as also HDEF needs to be implemented
5.) Anyway following your IOREG screen shots, SSDT-X299-RX580.aml should run OoB without any further modification, always supposed that you also use SSDT-DTPG.aml and SSDT-X299-HDEF.aml. SSDT-DTPG.aml and SSDT-X299-HDEF.aml do not require any modification either.

I don't know what you want me to do for you. All you need is provided. I cannot implement it for you on your system.

Good luck,

KGP
 
kgp said:
1.) Remove Shiki.kext, it is already part of Whatevergreen.kext
2.) Remove CAVS -> HDEF ACPI replacement from config.plist
3.) Use actual SSDT files from X299 SSDT Library. Remove SSDT-X299-iMacPro.aml and SSDT-XOSI.aml!
4.) Screenshots of your IOREG are useless as also HDEF needs to be implemented
5.) Anyway following your IOREG screen shots, SSDT-X299-RX580.aml should run OoB without any further modification, always supposed that you also use SSDT-DTPG.aml and SSDT-X299-HDEF.aml. SSDT-DTPG.aml and SSDT-X299-HDEF.aml do not require any modification either.

I don't know what you want me to do for you. All you need is provided. I cannot implement it for you on your system.

Good luck,

KGP
Click to expand...

Thank you very much mate! just need a little guidance that's all. let me try to do what you mentioned. I shall report back, hopefully with some good news.

Thank you again for your time, patients and effort. ✌️
 
My friends,

From today, I will be on holidays and hardly able to connect for some days.

Enjoy, have fun and thanks for your patience,

kgp.png
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top