- Joined
- Jan 16, 2011
- Messages
- 621
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i7-8700K
- Graphics
- Vega 64
- Mac
- Classic Mac
- Mobile Phone
I Just bought all the same parts except the m.2 drive and only have the CPU, RAM, and I'm using the onboard graphics for now and I cannot load into the install USB or any of my previous build hard drives with Mac OS on them or any of the clones of those. all I get is some sort of panic I'm guessing and I cannot see what's going on I took a screenshot on my phone of it but I have been building Hackintoshes for years and I have never experienced anything like this. Also, I do not know if this has to do with anything the BIOS will not update no matter what I do it's on F1 and I cannot Q-flash it or update it with window's bios update utility, and SATA 1 & and SATA5 & 6 do not work.
- Are you sure you have a Z370 Gaming 7 motherboard, as the Gigabyte website starts the first BIOS file at F2, not F1? You will have to get your Mobo to at least version F5 so it's comparable to this build. IMHO never use the BIO utility in Windows. Period. Do it from a FAT-formatted USB stick within the BIOS.
- Have you really set up the BIOS as per this build article?
- Have you enabled the drives for SATA 1,5 & 6 in BIOS properly?
- What PCIe cards have you got installed, if any?
- Are you using the UniBeast 8.3.2 - High Sierra, and has it only been created for this project i.e. not used to create another HS disk?