[Guide] HackrNVMeFamily co-existence with IONVMeFamily using class-code spoof

[Acden]

NVMe just works in High Sierra without any *hacks*!!!
But how to see it in clover to make it bootable?

 

[RehabMan]

NVMe just works in High Sierra without any *hacks*!!!

Some do, some do not.
But as written in post #1, this guide does not apply to 10.13.x.

But how to see it in clover to make it bootable?

Off-topic.

 

[Acden]

Some do, some do not.

Ok, hope it is not off-topic, I can confirm that SM951 works.

 

[RehabMan]

Ok, hope it is not off-topic, I can confirm that SM951 works.

If you're referring to Samsung SM951/NVMe (there is also an Samsung SM951/AHCI), it is already known that it works on 10.11/10.12 with this guide (eg. needs 512 byte LBA patches), and 10.13 native (10.13 has better 512 byte LBA support).

 

[def2000]

Hi RehabMan, I was wondering if it was possible to get this working on a X79 motherboard with updated Bios patch to enable NVME PCIE support? Wanted to know before I dove in... Thanks in advance! my IOREG read _SB.PCI0.NPE9

 

[RehabMan]

Hi RehabMan, I was wondering if it was possible to get this working on a X79 motherboard with updated Bios patch to enable NVME PCIE support? Wanted to know before I dove in... Thanks in advance! my IOREG read _SB.PCI0.NPE9

I don't see why not. This guide has nothing to do with BIOS support.

 

[def2000]

I don't see why not. This guide has nothing to do with BIOS support.

Thank you! Much appreciated....

 

[JFPR]

I don't see why not. This guide has nothing to do with BIOS support.

Dear RehabMan,

I can't seem to figure this out but I recently bough an ADATA SX8000NP NVMe PCIe Gen3x4 512GB SSD and I found out that it becomes "glitchy" under load, this means that if I'm using it at high transfer rates/use, then my mouse will glitch and roam on my desktop. I tested with a SATA SSD and this doesn't happens so I'm sure that it is not from my GPU.

I've attached my kexts folder and details regarding how OS sees my M.2 NVMe.

PS: I also added this to config.pslist - https://pikeralpha.wordpress.com/2016/06/27/nvmefamily-kext-bin-patch-data/
PS 2: I'm on 10.13.4 with Security Update.

 

[RehabMan]

PS: I also added this to config.pslist - https://pikeralpha.wordpress.com/2016/06/27/nvmefamily-kext-bin-patch-data/

You did not follow this guide. Read post #1.

 

[JFPR]

You did not follow this guide. Read post #1.

I'm sorry, I'm still a little bit new to this. Where can I find that post?
I also added HackrNVMeFamily.kext o EFI/.../other