macOS 10.13.4 Update

[balazs631]

Sleep works - I don't use 4K or MultiMonitor so cannot advise you there.

Is your RX 560 working with a DP cable? No injectors, no extra kexts with RadeonDeinit set to false? With or without Intel graphics? With which system definition? Thanks!

 

[WonkeyDonkey]

I read on several sites regarding eGPU support that the 560 was dropped (Possibly due to performance issues) and that only 570 and 580 were now officially supported.

 

[JozoR]

Thanks. I’ll test that after holidays, most notably multiple displays.

Anyway, now with Whatevergreen sleep takes some time (basically Pastryschef build with Asus Z370G board and 8600K + rx 560). Is putting computer to sleep faster now?

 

[P1LGRIM]

Is your RX 560 working with a DP cable? No injectors, no extra kexts with RadeonDeinit set to false? With or without Intel graphics? With which system definition? Thanks!

Mine is connected to a DVI monitor with a DVI cable.
No injectors.
No additional kexts.
RadeonDeinit set to false.
Without Intel graphics.
iMac14,2 SMBIOS.

 

[mike3run]

Updated via AppStore with no issues at all, audio kept working fine, Nvidia updated on it own although Cuda seems to be lacking still, so if you need cuda i'd suggest waiting a couple of days.

Otherwise, I have my 3 monitor setup (one in 4k) all working smoothly

Edit => UPDATE:

I ran the script from: https://github.com/Benjamin-Dobell/nvidia-update

And now I have Cuda back and the best Nvidia drivers for my machine, yay!

 

[longstation]

Are you on the most recent drivers or still on .104?

I am using 104 since people say the new driver is bad.

 

[bortoni]

Can you please shere some details? Clover config or kexts related to the RX 560? What type of monitor cable? Onboard Intel graphics + RX 560 or only the RX 560? Any special notes?
Just asking this because Apple dropped the official support for the RX 560 with 10.13.4 update.

Thanks Kee22!

See my post: https://www.tonymacx86.com/threads/...-radeon-rx560-nvme.238371/page-3#post-1719294

I have rx 560 with 4K DP and another one with DVI.

 

[onastvar]

The update went smooth, just like on a real mac.

 

[acherny]

I am sorry for the newb post, I updated from 10.13.3 -->10.13.4, everything went fairly smoothly except for the fact that my USB 3.0 is now disable. everyone is posting the patch but no one seems to explain how to apply it. HOW DO YOU INSTALL THE PATCH. I am in clover, i have been losing my mind for 10 hours. Where can I find a useful, step by step guide on how to apply the USB 3.0 fix.

 

[rayk60]

I am sorry for the newb post, I updated from 10.13.3 -->10.13.4, everything went fairly smoothly except for the fact that my USB 3.0 is now disable. everyone is posting the patch but no one seems to explain how to apply it. HOW DO YOU INSTALL THE PATCH. I am in clover, i have been losing my mind for 10 hours. Where can I find a useful, step by step guide on how to apply the USB 3.0 fix.

See Post # 149, use Text Editor ; copy and paste.