- Joined
- Jun 27, 2011
- Messages
- 13
- Motherboard
- Gigabyte
- CPU
- i5-3570
- Graphics
- GT 240
Hi,
I have a Zbook G4 Kabylake. Thanks to Rehabman and the posts on this thread, I have been able to install High Sierra. However, I am having issues trying to get it to boot off the hard drive. I have 2 SSD. High Sierra is installed on my 256 GB SSD (samsung mzvlv256hchp-000h1). The second SSD is 512 GB ( samsung mzvlw512hmup-000h1 ). At installation time, Disk Utility would only allow me to install on the 256 GB SSD because it had a GUID Partition table. Disk Utility would not allow me to partition the 512 GB SSD so I was not able to install on it.
What complicates things more is that the 512 GB SSD is only detected in UEFI Boot Mode. The 256 GB SSD is only detected in Legacy Boot mode. I've tried doing the Clover install to both SSD but the mobo doesn't seem to boot off them automatically. I can manually tell the Bios to boot off file and then maneuver to the Clover EFI file on the 512 GB SSD and things will boot up. But it is not automatically loading or detecting Clover installation on either drives.
Thank you everyone so far for all the help. Has anyone ever seen this before. I must be doing something dumb.
I have a Zbook G4 Kabylake. Thanks to Rehabman and the posts on this thread, I have been able to install High Sierra. However, I am having issues trying to get it to boot off the hard drive. I have 2 SSD. High Sierra is installed on my 256 GB SSD (samsung mzvlv256hchp-000h1). The second SSD is 512 GB ( samsung mzvlw512hmup-000h1 ). At installation time, Disk Utility would only allow me to install on the 256 GB SSD because it had a GUID Partition table. Disk Utility would not allow me to partition the 512 GB SSD so I was not able to install on it.
What complicates things more is that the 512 GB SSD is only detected in UEFI Boot Mode. The 256 GB SSD is only detected in Legacy Boot mode. I've tried doing the Clover install to both SSD but the mobo doesn't seem to boot off them automatically. I can manually tell the Bios to boot off file and then maneuver to the Clover EFI file on the 512 GB SSD and things will boot up. But it is not automatically loading or detecting Clover installation on either drives.
Thank you everyone so far for all the help. Has anyone ever seen this before. I must be doing something dumb.