Contribute
Register

[Guide] Dell Inspiron 15 7567 (and similar) (Near-Full Functionality)

Status
Not open for further replies.
iGeeek said:
Hello,

Following this tutorial I http://www.insanelymac.com/forum/topic/327089-alienware-15-r3-on-os-x-10126/
was able to install the Sierra system and the nVidia card until it appears as the attached image, I was able to install the webdriver but it did not work as it should, well I think this is a great advance but since I do not understand much of hackintosh I I could not go any further, even obliged by the tutorial.

View attachment 304395

I tried doing it based on the alienware 15 R3 where it has the 1060, 1070 and up to 1080.
I'll attach the used files and maybe some expert can do this magic.

NOTE: I did not activate the audio because my focus was to try to activate the GPU.
I used another HDD that I had to do this experiment.
Click to expand...

Great work. Was wondering, did you make sure that the Nvidia Driver was selected in the drop down menu of the driver? I know you need to make sure that is selected to actually use the driver after the install. Did you also try connecting something to the HDMI port to see if it is detected? That is really all I know about getting the Nvidia drivers to work and to use the NvidiaWeb section which I see you already used
 
Last edited:
iGeeek said:
Hello, I had success using this post, I will attach my files to help others, as I was helped, my SSDT completely deactivates nVidia, the temperature of the processor stays at 40 degrees, I get complete hibernation but I had to correct my EDID.
View attachment 304050
Click to expand...
HI; your acpi / patched folder misses the usb ssdt for this machine...here it is . and dont Forget to Rename it so it Will load correctly....
 

Attachments

  • SSDT-UIAC.aml
    465 bytes · Views: 106
amjmusic said:
HI; your acpi / patched folder misses the usb ssdt for this machine...here it is . and dont Forget to Rename it so it Will load correctly....
Click to expand...

What do you mean rename it? Rename to what? I am using his files too and so far it works pretty good! I just want to make sure I do it right, Thanks for providing this!
 
Andrw0830 said:
What do you mean rename it? Rename to what? I am using his files too and so far it works pretty good! I just want to make sure I do it right, Thanks for providing this!
Click to expand...
In Clover Acpi section , under sorted order list there is SSDT-UIAC-ALL.aml, while this file is not there in the acpi patched Folder...At first install of his files i noticed that usb 3 devices didn't work properly so i suspected a potential problem with usb configuration ... i said you must rename my file since the name is different mine is named SSDT-UIAC.aml . or you can simply drag the file in acpi patched and then rename the one in the sorted order list that's it...
 
amjmusic said:
In Clover Acpi section , under sorted order list there is SSDT-UIAC-ALL.aml, while this file is not there in the acpi patched Folder...At first install of his files i noticed that usb 3 devices didn't work properly so i suspected a potential problem with usb configuration ... i said you must rename my file since the name is different mine is named SSDT-UIAC.aml . or you can simply drag the file in acpi patched and then rename the one in the sorted order list that's it...
Click to expand...

SortedOrder is best left unspecified.
As per ACPI patching guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

With current versions of Clover, recommended ACPI configuration is SortedOrder unspecified, DropOem=false, AutoMerge=true, patched SSDTs name the same as extracted to ACPI/origin. Add-on SSDTs (such as SSDT-UIAC.aml, SSDT-PNLF) can just be added to ACPI/patched.
 
RehabMan said:
SortedOrder is best left unspecified.
As per ACPI patching guide:
https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

With current versions of Clover, recommended ACPI configuration is SortedOrder unspecified, DropOem=false, AutoMerge=true, patched SSDTs name the same as extracted to ACPI/origin. Add-on SSDTs (such as SSDT-UIAC.aml, SSDT-PNLF) can just be added to ACPI/patched.
Click to expand...
Well with His configuration this is what it is set to...
Acpi section.jpg
 
@AGuyWhoIsBored @Andrw0830


I bought the BCM94352Z Card and traded by the original, but BCM94352Z does not work, not even aparace in BIOS / UEFI and Windows. Detail: I complained with the seller that the card did not work and the same sent me another and I have the same problem of not working. Was it some sort of white list? Can anyone report which cards are really compatible with this notebook?
cardswifi.jpeg
 
iGeeek said:
@AGuyWhoIsBored @Andrw0830


I bought the BCM94352Z Card and traded by the original, but BCM94352Z does not work, not even aparace in BIOS / UEFI and Windows. Detail: I complained with the seller that the card did not work and the same sent me another and I have the same problem of not working. Was it some sort of white list? Can anyone report which cards are really compatible with this notebook?View attachment 307299
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top