Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
Quipper said:
Hello RehabMan,

yes i did an EC reset. I make it every time if my keyboard or or touchpad is not working after boot.
Attached again problem reporting files with the gen_debug.sh tool. Hope it helps. (ACPI/origin/ACPI Tables and misc/preboot.log is not actual because after reboot keyboard and trackpad working again)
Thanks
Click to expand...

You have some kexts installed incorrectly:
Code: 
Kext rejected due to improper filesystem permissions: <OSKext 0x7f89d7615960 [0x7fff91ade980]> { URL = "Shiki.kext/ -- file:///Library/Extensions/", ID = "as.vit9696.Shiki" }
Shiki.kext does not authenticate; omitting.
Kext rejected due to improper filesystem permissions: <OSKext 0x7f89d772df40 [0x7fff91ade980]> { URL = "IntelGraphicsFixup.kext/ -- file:///Library/Extensions/", ID = "as.lvs1974.IntelGraphicsFixup" }
IntelGraphicsFixup.kext does not authenticate; omitting.

Since you seem to be installing kexts manually, see FAQ for proper kext installation procedures using Terminal:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
jkl555 said:
I just bought a refurbished HP Elitebook 840 G1 with I5 4300U and HD 4400. I followed every step in the OP. All went well except the graphics. It is exactly not working. Youtube is fine. But running applications like Kodi gives me blank screen, VLC also blank screen but has audio. Even some applications show incomplete output, for example, when I want to save the output of IO Reg, the dialog window is blank (so I just press return hoping something will be saved). I attached the screenshot in the same post. I have also attached the "Problem Reporting" files here as well.

Not sure how to proceed and I can use some help here. Thanks advance.View attachment 306232
Click to expand...

Check that BIOS is up-to-date, and BIOS settings are correct as per post #1.
Maybe you forgot to set DVMT-prealloc correctly (the ig-platform-id used for your model requires 64mb).
Also, the guide recommends OsxAptioFixDrv-64.efi, not OsxAptioFix2Drv-64.efi.

Also, the guide recommends the latest RehabMan build of Clover, not the one you're using.
If you want to experiment with the latest Clover (that has some serious changes for OsxAptioFix), you can do that on your own time.
 
Hi,

I am experiencing some random freezes on High Sierra + APFS + TRIM disabled (Samsung MZ7PA128HMCD-010H1) on HP EliteBook 8560p. Anyone has experience or experiencing it?.

The window system get freeze but I can move the mouse pointer and I still earing audio if it was playing after freeze :/.

Regards.
 

Attachments

  • debug_30958.zip
    2.8 MB · Views: 59
Last edited:
RehabMan said:
What are you asking?
You seem to imply your install was successful, but then you post a photo of a KP which implies failure.
Which is it?
Click to expand...
OS is booting if i use for example ./install_acpi.sh install_4x40s_hires or 9480m mode but not if i use 9470m mode.
Also booting if i first install ./install_acpi.sh install_4x40s_hires, config_4x40s.plist reboot and then reinstall with 9470m profil.
Clean install with 9470m profil OS dont boot and clover picture is for that situation.
This is to hard to explain with my bad english.
 
Pescado said:
Hi,

I am experiencing some random freezes on High Sierra + APFS + TRIM disabled (Samsung MZ7PA128HMCD-010H1) on HP EliteBook 8560p. Anyone has experience or experiencing it?.

The window system get freeze but I can move the mouse pointer and I still earring audio if it was playing before freeze :/.

Regards.
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.
 
macleno said:
I make new efi install but mistake i use guide literally and didn't remember use my 9470m profil but now it boot.
Then i install with right profil and again it boot.
Is it clover settings correct now, could you check it please?
Clover picture is from clean install.
Thank you for the efforts
Click to expand...
macleno said:
OS is booting if i use for example ./install_acpi.sh install_4x40s_hires or 9480m mode but not if i use 9470m mode.
Also booting if i first install ./install_acpi.sh install_4x40s_hires, config_4x40s.plist reboot and then reinstall with 9470m profil.
Clean install with 9470m profil OS dont boot and clover picture is for that situation.
This is to hard to explain with my bad english.
Click to expand...

Use diffmerge to compare "CLOVER_boot no" and "CLOVER_boot yes".

Also:
- Note that you don't have a proper SSDT.aml generated from ssdtPRgen.sh.
- your CPU may require KernelXCPM=true
 
RehabMan said:
Use diffmerge to compare "CLOVER_boot no" and "CLOVER_boot yes".

Also:
- Note that you don't have a proper SSDT.aml generated from ssdtPRgen.sh.
- your CPU may require KernelXCPM=true
Click to expand...

That tip, CPU may require KernelXCPM=true, solved my problem.

Thanks a lot
 
jigg said:
I just downloaded build Clover v2.4 r4359.RM-4506.7036cf0a (which I thought I already had) but I can still not find the boot without caches option. Is this the right link: https://bitbucket.org/RehabMan/clover/downloads/ ?
Click to expand...

Don't go to the options menu in clover. As soon as the clover screen loads, hit the space bar. Then you'll see a new menu.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top