[FIX] HD4200/HD4400/HD4600/HD5600 on 10.11+

[RehabMan]

Thanks for taking the time!!

Here Im attaching the report files after following the guide. (I did it before as well).

Im still having the same issue, the invalid fake id is because that's the only way I can boot with laggy and bad graphics. If I use 0x04128086 the screen after loading will go dark (or off) eventhough I can tell the computer is working normally, I just cant see anything on the screen.

Anything you can see?

Problem reporting data must represent the problem scenario.
If you have an issue booting, you must provide verbose boot photo.
None attached.

Also, your profile is not filled out with laptop hardware details.
Please fix before your next reply as per FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[baratete]

The problem is that after the system loads everything in verbose mode when it is supossed to go into the osx graphical interface I just get nothing, no screen, all black even though I can realize the system is working normally... If at that moment I plug in an external monitor through hdmi I get full graphics working great with full acceleration, so it seems to be the internal monitor of the laptop....

 

[baratete]

Here's a second version of the ioreg after booting with the external monitor as I described above...

 

[RehabMan]

The problem is that after the system loads everything in verbose mode when it is supossed to go into the osx graphical interface I just get nothing, no screen, all black even though I can realize the system is working normally... If at that moment I plug in an external monitor through hdmi I get full graphics working great with full acceleration, so it seems to be the internal monitor of the laptop....

Here's a second version of the ioreg after booting with the external monitor as I described above...

Internal panel is not detected. You probably need to inject EDID.
Clover is detecting your EDID successfully, so you can inject with confg.plist/Graphics/EDID/Inject=true.

 

[baratete]

I tried injecting EDID from clover menu options and after loading in verbose mode the system restarts by itself...
Any idea?

 

[RehabMan]

I tried injecting EDID from clover menu options and after loading in verbose mode the system restarts by itself...
Any idea?

Set EDID/Inject=true in config.plist as mentioned.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[baratete]

Set EDID/Inject=true in config.plist as mentioned.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

I did as you described above and the system keeps restarting after system load in verbose...

I cannot post the files you request because i cannot access osx...

Here's a photo taken right before it restarts...

 

[baratete]

Here's efi/clover after adding EDID inject=true, obviously had to turn it off in clover boot menu to be able to get into osx..

(Sorry, don't mean to do many posts at once)

 

[Demugenjo]

Hello ,I've followed your instructions but still can not get Full QE/CI
any suggestions?

 

[baratete]

Here's efi/clover after adding EDID inject=true, obviously had to turn it off in clover boot menu to be able to get into osx..

(Sorry, don't mean to do many posts at once)

I can't believe it!!! I found the solution after weeks of trial!!! For anyone interested my intel hd4200 got working with full acceleration and as expected with the following configuration:

ig-platform-id: 0x0d2200003 (under desktop for haswell in clover config)
Inject EDID=true
Inject Intel= true

Also, fake pciid kexts are installed with kextbeast in /L/E/ , its essential that this kexts are installed.

and aparently thats it.

Thank you very much for your help rehabman! You rock! Im so happy!!!