RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,015
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Thank you that fixed it.
I assume you also added a correct SortedOrder to config.plist/ACPI/SortedOrder.
Thank you that fixed it.
Yes actually I meant to quote post #1506 but made a mistake.I assume you also added a correct SortedOrder to config.plist/ACPI/SortedOrder.
I assume you also added a correct SortedOrder to config.plist/ACPI/SortedOrder.
sorry for my bad English,
I have installed Mac OS Sierra and now wanted to upgrade to Mac OS High Sierra with the following error message: "com.apple.WindowServer with ran for 0 seconds and that it will respawn in 10sec."
I get it with this guide but not there, can give me a hints?
I fixed sleep issue but now after waking from sleep my device works normally for like 5 minutes and then reboots. Did that happen to any one before?Yes actually I meant to quote post #1506 but made a mistake.
Sleep causes restart now so I'll try to fix it.
I fixed sleep issue but now after waking from sleep my device works normally for like 5 minutes and then reboots. Did that happen to any one before?
Also my touchpad stops functioning so the problem could be caused by the VoodooI2C kext.
SHAIZUs-MacBook-Pro:patched shaizu$ grep -l Method.*_OFF *.dsl
SSDT-10.dsl
SSDT-3.dsl
SHAIZUs-MacBook-Pro:patched shaizu$ grep -l Method.*_INI *.dsl
DSDT.dsl
SSDT-10.dsl
SSDT-9.dsl
SSDT-PNLF.dsl
SSDT-UIAC.dsl
SSDT.dsl
#Maintained by: RehabMan for: HP Probook 4x30s/4x40s
# 11a_Radeon_OFF_SSDT.txt
# To disable the Radeon chipset
# Apply these patches to SSDT containing the secondary graphics routines
# "SgTabl" (SSDT-5)
# Include patched version as SSDT-1.aml
# Known issue: Restarting your computer may cause shutdown instead.
# syntax fixes
into scope label \_SB.PCI0.GFX0 code_regex (OperationRegion.*)VRMB\s+\(VRMS\s+\(\)\), replace_matched begin %1VRMB(),VRMS())\n end;
into scope label \_SB.PCI0.GFX0 code_regex (Field\s+\(REVD,[^\}]*\})\) replace_matched begin %1 end;
into scope label \_SB.PCI0.PEGP code_regex (OperationRegion.*)\\XBAS\s+\((.*)\), replace_matched begin %1\\XBAS,%2)\n end;
into scope label \_SB.PCI0.PEGP code_regex (Field\s+\(RPCX,[^\}]*\})\) replace_matched begin %1 end;
into scope label \_SB.PCI0.PEGP.DGFX code_regex (OperationRegion.*)\\GBAS\s+\((.*)\), replace_matched begin %1\\GBAS,%2)\n end;
into scope label \_SB.PCI0.PEGP.DGFX code_regex (Field\s+\(GPIO,[^\}]*\})\) replace_matched begin %1 end;
into scope label \_SB.PCI0.PEGP.DGFX code_regex (OperationRegion.*)\\EECP\s+\((.*)\), replace_matched begin %1\\EECP,%2)\n end;
into scope label \_SB.PCI0.PEGP.DGFX code_regex (Field\s+\(PCAP,[^\}]*\})\) replace_matched begin %1 end;
into definitionblock code_regex External\s+\((.*_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj) end;
into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)\n.*Arg0 replace_matched begin Return(%1(Arg0)) end;
# rename GFX0
into_all all code_regex \.GFX0 replaceall_matched begin .IGPU end;
into_all all label \_SB.PCI0.GFX0 set_label begin \_SB.PCI0.IGPU end;
# remove wait for LNKS (while loop) (not necessary, commented out for now)
#into method label _OFF parent_label \_SB.PCI0.PEGP.DGFX code_regex While\s+\([^\}]*\} remove_matched;
# call _OFF from _SB.PCI0.DGFX._INI
into method label _INI parent_label \_SB.PCI0.PEGP.DGFX code_regex . insert begin _OFF()\n end;
# some patches specific to 4530s w/ Radeon
into method label _DSM parent_label \_SB.PCI0.IGPU remove_entry;
into scope label \_SB.PCI0.PEGP code_regex (Field\s+\(RPCX,[^\}]*\})\) replace_matched begin %1 end;
into definitionblock code_regex External\s+\((_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj)
I got these results with grep
should I apply this patch from your repo on SSDT-10.dsl to disable discrete graphics?Code:SHAIZUs-MacBook-Pro:patched shaizu$ grep -l Method.*_OFF *.dsl SSDT-10.dsl SSDT-3.dsl SHAIZUs-MacBook-Pro:patched shaizu$ grep -l Method.*_INI *.dsl DSDT.dsl SSDT-10.dsl SSDT-9.dsl SSDT-PNLF.dsl SSDT-UIAC.dsl SSDT.dsl
Code:#Maintained by: RehabMan for: HP Probook 4x30s/4x40s # 11a_Radeon_OFF_SSDT.txt # To disable the Radeon chipset # Apply these patches to SSDT containing the secondary graphics routines # "SgTabl" (SSDT-5) # Include patched version as SSDT-1.aml # Known issue: Restarting your computer may cause shutdown instead. # syntax fixes into scope label \_SB.PCI0.GFX0 code_regex (OperationRegion.*)VRMB\s+\(VRMS\s+\(\)\), replace_matched begin %1VRMB(),VRMS())\n end; into scope label \_SB.PCI0.GFX0 code_regex (Field\s+\(REVD,[^\}]*\})\) replace_matched begin %1 end; into scope label \_SB.PCI0.PEGP code_regex (OperationRegion.*)\\XBAS\s+\((.*)\), replace_matched begin %1\\XBAS,%2)\n end; into scope label \_SB.PCI0.PEGP code_regex (Field\s+\(RPCX,[^\}]*\})\) replace_matched begin %1 end; into scope label \_SB.PCI0.PEGP.DGFX code_regex (OperationRegion.*)\\GBAS\s+\((.*)\), replace_matched begin %1\\GBAS,%2)\n end; into scope label \_SB.PCI0.PEGP.DGFX code_regex (Field\s+\(GPIO,[^\}]*\})\) replace_matched begin %1 end; into scope label \_SB.PCI0.PEGP.DGFX code_regex (OperationRegion.*)\\EECP\s+\((.*)\), replace_matched begin %1\\EECP,%2)\n end; into scope label \_SB.PCI0.PEGP.DGFX code_regex (Field\s+\(PCAP,[^\}]*\})\) replace_matched begin %1 end; into definitionblock code_regex External\s+\((.*_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj) end; into method label _BCM parent_label DD02 code_regex Return\s+\(([^\)]*)\)\n.*Arg0 replace_matched begin Return(%1(Arg0)) end; # rename GFX0 into_all all code_regex \.GFX0 replaceall_matched begin .IGPU end; into_all all label \_SB.PCI0.GFX0 set_label begin \_SB.PCI0.IGPU end; # remove wait for LNKS (while loop) (not necessary, commented out for now) #into method label _OFF parent_label \_SB.PCI0.PEGP.DGFX code_regex While\s+\([^\}]*\} remove_matched; # call _OFF from _SB.PCI0.DGFX._INI into method label _INI parent_label \_SB.PCI0.PEGP.DGFX code_regex . insert begin _OFF()\n end; # some patches specific to 4530s w/ Radeon into method label _DSM parent_label \_SB.PCI0.IGPU remove_entry; into scope label \_SB.PCI0.PEGP code_regex (Field\s+\(RPCX,[^\}]*\})\) replace_matched begin %1 end; into definitionblock code_regex External\s+\((_SB_\.PCI0\.GFX0\.DD02\._BCM),\s+IntObj\) replace_matched begin External(%1, MethodObj)
#Maintained by: RehabMan for: Laptop Patches
#graphics_REG-disable.txt
# The purpose of this patch is to add code to _REG in EC
# to disable nvidia/Radeon
#
# The path of _OFF may have to be customized to match your SSDTs
# The patch attempts to identify the correct _REG by using
# the ACPI PNP identifier for the EC.
into method label _REG parent_hid PNP0C09 insert
begin
//added to turn nvidia/radeon off\n
If (LAnd(LEqual(Arg0,3),LEqual(Arg1,1)))\n
{\n
External(\_SB.PCI0.PEG0.PEGP._OFF, MethodObj)\n
\_SB.PCI0.PEG0.PEGP._OFF()\n
}\n
end;
I used patch Disable Nvidia from DSDT -> System Report it ok but i boot install High Sierra error "Window Server Service only ran for 0 seconds". It can be seen that it is not completely disabled. Pls help me check it. Thanks you so much!
Code:#Maintained by: RehabMan for: Laptop Patches #graphics_REG-disable.txt # The purpose of this patch is to add code to _REG in EC # to disable nvidia/Radeon # # The path of _OFF may have to be customized to match your SSDTs # The patch attempts to identify the correct _REG by using # the ACPI PNP identifier for the EC. into method label _REG parent_hid PNP0C09 insert begin //added to turn nvidia/radeon off\n If (LAnd(LEqual(Arg0,3),LEqual(Arg1,1)))\n {\n External(\_SB.PCI0.PEG0.PEGP._OFF, MethodObj)\n \_SB.PCI0.PEG0.PEGP._OFF()\n }\n end;