I just bought a BCM94352HMB card, and I have been spending the better part of today trying to understand the instructions listed in the first post, but everything looks completely alien to me. Could anyone help me with the following questions:
1) Enable WiFi: if I understand correctly, I only need to choose one of the 5 methods listed (kext enabler; kext edit/Info.plist; dsdt edits; ssdt enabler; Clover/config.plist/, which is not working). I chose to use kext enabler, and installed FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext using Kext Wizard (I downloaded RehabMan FakePCIID-2017-0527). After reboot, I go to System Preferences->Network, click on the plus sign under the right panel, but no wifi option appears in the "Interface" pull-down box. I have double checked my computer's bootup UEFI settings, and both onboard wifi and bluetooth are enabled. So, after kext enabler, is it normal for the wifi to not appear in the interface pull-down box yet, or have I done something wrong?
2) ROW/WiFi Country Code: I checked Sebinouse's post about country codes, and I understand that I need to convert the two country code letters into hexadecimal (in my case, "TW" would be "54 57"). But in the "Installation" part, I don't understand the instruction "config-bcm94352...plist (repo)": I don't know where this .plist file is. I understand that once I find the .plist file, I just need to edit out the relevant values for the country code.
3) Airport/WiFi/Whitelist: Since my Broadcom card is not BCM94331xx or BCM943224xx, I assume I don't need to worry about whitelisting? But further down in "Installation (select one method), the first is "FakePCIID for BCM94352", and it says "See Airport/WiFi Injection Methods/1. kext enabler", which I have already done as noted above (assuming I did it correctly).
Just getting wifi working would be enough for me. I managed to get a Dell netbook and an MSI netbook running Snow Leopard several years ago, and the Dell also involved editing stuff to get wifi working, but this time around I feel like a complete idiot because I can't understand the instructions. Any help would be greatly appreciated.
PS I almost forgot, in terms of my hardware, I am using an Asus VivoMini UN-62 with an i5-4210U (Haswell) processor, with a built-in 128G Hynix mSATA SSD, and RAM maxed out at 16GB (Kingston). As mentioned, I've swapped out the built-in wifi card and replaced it with BCM94352HMB. Other than a cheap USB keyboard and mouse, an HDMI monitor, and a USB flash drive to transfer files from my MacBook Air to the Asus, I haven't connected anything else.