Contribute
Register

HP OMEN 15-5113dx

Status
Not open for further replies.
beckhamba07 said:
I disabled Legacy and it works (I think the PC bypass HDMI detection so I can get in Clover boot screen. But now this problem shows up (please watch the video). As soon as OSX recognize HDMI it mirrors the screen and ahow the glitch. It was in 10.12.4 and after I updated 10.12.5 same thing happen.
I have to fix it by using the TV screen to disable one monitor and re-enable it and it works again. Can you help me fix it?
Thanks
Video link:
Click to expand...

What if you hotplug the HDMI and keep legacy boot enabled?

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 

Attachments

  • CLOVER.zip
    11.5 MB · Views: 101
  • kextstat.txt
    894 bytes · Views: 201
  • kextcache.txt
    621 bytes · Views: 247
  • Bao’s MacBook Pro.ioreg
    4.7 MB · Views: 170
beckhamba07 said:
If I enable legacy and get through Colver bootloader first, then when in OSX I hot plug HDMI, both screen work perfectly without the glitch.
Click to expand...

Sounds like you have a solution....
 
RehabMan said:
Sounds like you have a solution....
Click to expand...
But the thing is if I leave HDMI plugged in everytime I restart or re power the laptop Clover freeze, so I have to remove the cable, which is very annoying because I want to plug in HDMI cable all the time :(
And the worst thing is before I update BIOS Clover works with the HDMI cable plugged in, it loads in low resolution, but it loads.
Any other idea?
 
beckhamba07 said:
But the thing is if I leave HDMI plugged in everytime I restart or re power the laptop Clover freeze, so I have to remove the cable, which is very annoying because I want to plug in HDMI cable all the time :(
And the worst thing is before I update BIOS Clover works with the HDMI cable plugged in, it loads in low resolution, but it loads.
Any other idea?
Click to expand...

UPDATED: ok never mind my man. I went back to Clover build 4049 and it works like a charm. Didn't know what Clover 4061 changed but now I am staying with 4049 for good.
 
beckhamba07 said:
UPDATED: ok never mind my man. I went back to Clover build 4049 and it works like a charm. Didn't know what Clover 4061 changed but now I am staying with 4049 for good.
Click to expand...

You should look at the commit logs for Clover r4049 through r4061.
 
I have another question. What I did to Audio is using the patch by Mirone for ALC 282 v.2, and apply audio layout 3 patch then sound works. But the volume I think is quite low. Is there a way to boost up the volume?
Thanks
 
beckhamba07 said:
I have another question. What I did to Audio is using the patch by Mirone for ALC 282 v.2, and apply audio layout 3 patch then sound works. But the volume I think is quite low. Is there a way to boost up the volume?
Thanks
Click to expand...

It is a common problem.
Some people use Boom to improve the volume level.
 
Boom really works. Thank you!
 
Dear ReHabMan

Is there a way to make trackpad recognizes 3 fingers or up? I think my trackpad supports 3 fingers for windows.
Thanks
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top