Contribute
Register

Fix Sleep on Sierra

Status
Not open for further replies.
Last edited:
VoiletDragon said:
XHC is USB 3.0 Controller. AppleLPC isn't loaded, SMBUS isn't loaded. Theres no MCHC device, XHC isn't patched and your USB configuration is messy.
Click to expand...

I don't know if I'm doing things right, do you see any improvement now?
Thanks
 

Attachments

  • iMac di Max2.zip
    763 KB · Views: 73
VoiletDragon said:
You can use either a DSDT but probably better to use Clover Hotpatch. https://github.com/VoiletDragon/Series-100-Patches
Click to expand...

Thanks for replying.
I've put SSDT-LPC.aml to /EFI/CLOVER/ACPI/patched and copy acpi_dsdt_patches.plist to my config.plist's <dsdt> block, but sleeping still doesn't work. Fans do stop, monitor black out, but when I try to wake the hackintosh up, in some unknown case (about 50% chance), the monitor shows that there are signal sent to it but instead of login page, it gives me a whole black page, also, keyboard shows that it's connected to the computer and the LED on caps lock can toggle correctly, which is the same as before.

The ioreg and clover files are attached. Thanks a lot for your help.
 

Attachments

  • AlleniMac.ioreg
    4.7 MB · Views: 107
  • CLOVER.zip
    14.6 MB · Views: 77
s3131212 said:
Thanks for replying.
I've put SSDT-LPC.aml to /EFI/CLOVER/ACPI/patched and copy acpi_dsdt_patches.plist to my config.plist's <dsdt> block, but sleeping still doesn't work. Fans do stop, monitor black out, but when I try to wake the hackintosh up, in some unknown case (about 50% chance), the monitor shows that there are signal sent to it but instead of login page, it gives me a whole black page, also, keyboard shows that it's connected to the computer and the LED on caps lock can toggle correctly, which is the same as before.

The ioreg and clover files are attached. Thanks a lot for your help.
Click to expand...

You haven't added all the SSDTs. SMBIOS/Trust should be True not False.
 
maxhp said:
I don't know if I'm doing things right, do you see any improvement now?
Thanks
Click to expand...

Attach Clover Folder removing Themes ZIP attach.
 
VoiletDragon said:
All SSDTs goes in EFI/Clover/ACPI/patched. Will need ACPI, DSDT, Patches added to config. https://github.com/VoiletDragon/Series-100-Patches
Click to expand...

I've put all the SSDTs except GLAN, HACK and LAN in the patched folder then added the patches to config.plist.
Please take a look at the attached Clover and IOreg and let me know if there's anything else I should do.
I'm still using the "Increase Max Port Limit" patch... Should I remove it?
Thanks
 

Attachments

  • Clover.zip
    1.2 MB · Views: 89
  • iMac di Max3.zip
    770.3 KB · Views: 80
maxhp said:
I've put all the SSDTs except GLAN, HACK and LAN in the patched folder then added the patches to config.plist.
Please take a look at the attached Clover and IOreg and let me know if there's anything else I should do.
I'm still using the "Increase Max Port Limit" patch... Should I remove it?
Thanks
Click to expand...

Your config.plist is corrupt. Increase Max Port Limit is only temporary and requires customising SSDT-UIAC. Take a look at [Guide] 10.11+ USB changes and solutions | tonymacx86.com
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top