UniBeast: Install macOS Sierra on Any Supported Intel-based PC

[Feartech]

For me sierra in no way boting in full screen if I install graphics drivers it's stuck at login

read post 664

 

[alpha0]

<p> is this guide also works for hp windows running laptop?</p>

 

[Feartech]

follow the clover guide linked from the faq:

https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

pay attention to the skylake information

 

[beltra]

Thank you so much for the guide. I'm looking forward to have my Sierra working flawless as soon as possible, but I'm experiencing a difficulty. I have followed all the steps until STEP 4, when it came to BOOT MAC OS X FROM USB, I chose that, and suddenly the apple logo on black screen with a progress bar appeared. I was all excited, but it is stuck at the beginning of the bar and won't progress. It has been about almost 2 hours, and nothing happens. Is this normal? What should I do? I'm afraid of restarting it and **** things up. Any help on this? @tonymacx86 @trs96 @Stork @pastrychef
Thanks in advance

 

[xixiix]

this is not a help thread, please create a new thread if you need help

thank you ! I'm Ok but my net card is not supported ,i want to buy a use netCard ,can you
recommend one for me? thanks again!!

 

[Jar-Jar]

Good morning friends.

I know what I'm going to say may seem a bit strange, but it's real as life itself.

Regardless of which has a hack that works great, I tried to create a pendrive to install saw on the computer of the office, but the problem comes when after putting the language in English so that it works unibeast, I execute the program, it begins to do it, and You can easily throw 2 hours and is still at the point of "installing bootloader ".

Never finished the process. Any suggest?

Thank you in advance.

 

[beltra]

Good morning friends.

I know what I'm going to say may seem a bit strange, but it's real as life itself.

Regardless of which has a hack that works great, I tried to create a pendrive to install saw on the computer of the office, but the problem comes when after putting the language in English so that it works unibeast, I execute the program, it begins to do it, and You can easily throw 2 hours and is still at the point of "installing bootloader ".

Never finished the process. Any suggest?

Thank you in advance.

I had a similar issue while trying to install the Sierra OS lately. What worked out for me was to tweak the BIOS configuration. Since I was only Load Optimized Defaults in my BIOS, was not enough to proper install Sierra. It ended up at this frozen Apple screen while the bar stuck at the very beginning of the installation.
I built a similar machine to the one of this thread:
https://www.tonymacx86.com/threads/...og-maximus-viii-hero-i7-6700k-gtx-980.197284/

So, I had to follow these steps, then my installation could work as it should.

Step 3 in the tonymacx86 guide.
Update the BIOS to the latest version which is 2202 (September 26, 2016). If you're without a working computer, download it on a friend's computer and follow the USB BIOS Flashback method on page 2-12 of the GENE User's Guide.
Once the BIOS is updated, boot into the BIOS, use the Advanced Mode and make the following changes:
Extreme Tweeker
AI Overclocker Tuner > X.M.P.
Extreme Tweeking > Enable
Advanced Items
System Agent (SA) Configuration > VT-d > Disable
PCH Configuration > IOAPIC 24-119 > Disabled
USB Configuration > Legacy USB Support > Auto
USB Configuration > XHCI Hand Off > Enabled
APM Configuration > Power on by PCI - E/PCI > Disabled
Boot Menu
Fast Boot > Disabled
Boot Logo Display > Disabled
Secure Boot > OS Type > Other OS
Boot Option 1 > USB installer thumb drive
Exit > Save Changes

Remember to search for an Installation Guide according to your hardware, I'm not sure at all if this BIOS config will work for your Motherboard. But I think I should share my case with you... Good luck! @Jar-Jar
Ps.: Very cool Senna avatar

 

[dantheman97]

Hi I have followed all the steps, but i get stuck on the black screen with the apple sign almost immediately. The verbose ends with a bunch of xxxxx, and shows only 3 other lines. Please help!

 

[Feartech]

Hi I have followed all the steps, but i get stuck on the black screen with the apple sign almost immediately. The verbose ends with a bunch of xxxxx, and shows only 3 other lines. Please help!

not without any hardware specs we can't

please update your hardware profile as per rules

 

[thomveen]

every time he stops when the bar under the apple logo is full