No Sound - Realtek ALC AppleHDA [Guide]

[toleda]

Not sure what DPCIManager/misc/BootLog is

See Post #1

right after I enter my password the terminal window disappears

Never witnessed or heard of this problem. Use MultiBeast
Attach DPCIManager/Status (Tools 2.)
Remove S/L/E/HDAEnabler1.kext
You are not booting Yosemite, you are booting MacStorage. Why?

 

[RedBedford]

See Post #1

Never witnessed or heard of this problem. Use MultiBeast
Attach DPCIManager/Status (Tools 2.)
Remove S/L/E/HDAEnabler1.kext
You are not booting Yosemite, you are booting MacStorage. Why?

Attached. I'm not sure what you mean. I manually select Yosemite to boot. MacStorage is the 1TB storage drive, not my boot drive.

 

[toleda]

MacStorage is the 1TB storage drive, not my boot drive.

Why is your Downloads folder on MacStorage?
No audio codecs, something is very broken. Clean install.

 

[RedBedford]

Why is your Downloads folder on MacStorage?
No audio codecs, something is very broken. Clean install.

The original downloads folder is still on Yosemite, I just use a downloads folder on MacStorage to keep the SSD free for the OS and Applications and such things. Clean install is the only way? I have backups, could I do a clean install then recover from a backup to recover my applications and settings (without it messing up the codecs)?

 

[toleda]

could I do a clean install then recover from a backup to recover my applications and settings

Suggest a clean install, fix audio and then Migration Assistant.

 

[RedBedford]

Suggest a clean install, fix audio and then Migration Assistant.

Thanks for all of your help, I'll try that in the morning.

 

[CrazyRundong]

my device is ALC887, Internal microphone works fine (Siri can hear me) but Internal Speakers don't work. Option "Internal Speakers" is available in Setting, and volume is adjustable, but I can't hear anything in earphone. HDMI audio output works fine.

macOS 10.12.2, GA-H77-TN motherboard( 2 audio ports onboard, audio_id=1 ), F4 BIOS, i3-3225 with HD4000;

I used audio_cloverALC-120_v1.0d.command to install. Console output:

Configuration:

Apple Internal: disabled
Kext Signing: disabled
Filesystem Protections: disabled
Debugging Restrictions: enabled
DTrace Restrictions: enabled
NVRAM Protections: enabled
BaseSystem Verification: enabled

This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.

another script:

File: audio_codecdetect.command_v2.0

HDMI audio codec(s)
Intel: 0x80862806

Onboard audio codec
Realtek: 0x10ec0887

OS X/10.12.2 Onboard Audio
Device: HDEF@1B
Audio ID: 3

Valid audio codec, audio device and Audio ID; audio injection is working

Thank you very much.

 

[toleda]

I can't hear anything in earphone

What port is the headphone connected to?

 

[Jakub117]

Hi All.
I am new in this forum and I am having problem with no sound on my fresh instal of Sierra 10.12.2
Previously I was running El Capitan with no problems.

I have audio in/out available. Tried multiple recommendations from forum , tried all possible ports - front / back , tried clear CMOS, second fresh instal and other before I decided to ask here.

1. No Sound after successful instal of CloverALC , Device ID 1
2. 1. MOTHERBOARD: Gigabyte Z77-UD5H rev 1.0
   2. RAM: Corsair 2x4GB
   3. PROCESSOR: Intel core i5 2500k
   4. GRAPHICS: Gigabyte GTX 660ti 2GB
   5. CASE: Corsair 500R
   6. OSX VERSION: Yosemite 10.12.2
3. Clover ALC - Toleda ALC-120 v1.0d command - terminal log attached.txt
4. Attached IOReg (ioreg.ioreg)
5. attached
6. Not found
7. No Message found
8. DCPIManager.jpg attached
9. N/A
10. Attached /EFI/CLOVER/config.plist
11. Speakers
    1. Genius - SP HF1250B
       
    2. Green port - motherboard
    3. Internal speakers

I hope there will be a way to fix my problem rather than downgrade back to 10.11
Thanks

 

[toleda]

no sound on my fresh install

Not a fresh install.
See Realtek ALC AppleHDA/Post #1
Uninstall Realtek ALC AppleHDA/3. pikeralphaALC
Reply with new files