[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[kgplinux]

Your config.plist is not from my guide.

You're right. You adviced not to create Installer using a VM. Unfortunately that's all I have now. In the past, I created an installer using a VM and it worked. Wishing it works again.

 

[RehabMan]

You're right. You adviced not to create Installer using a VM. Unfortunately that's all I have now. In the past, I created an installer using a VM and it worked. Wishing it works again.

Follow the guide as written.
Create your USB installer on real hardware.
config.plist content has nothing to do with VM vs. not VM.

 

[Jiachen]

Read post #1, "Problem Reporting".

There is a mistake in my previously uploaded file. I have followed your instruction in "Problem Reporting" and the new corrected file is uploaded on dropbox. Everytime I upload the zip as attachment, the shockwave flash crashes somehow. I'm sorry.
https://www.dropbox.com/s/lxonpf3td6tnt82/HP_ZBook_14_G1_Jiachen.zip?dl=0

 

[traidor]

bcm95432 is not valid.
bcm95432z is not valid.

Your laptop is likely NGFF/M.2 (2230). Read post #1.

Sorry,I meant bcm94352hbm or bcm94352zhbm and in Aida64 on Windows I found:
Field Value
Device Properties
Device Description Intel Dual Band Wireless-AC 3165 AC HMC WiFi Adapter
Bus Type PCI Express 2.0 x1
Bus / Device / Function 2 / 0 / 0
Device ID 8086-3165
Subsystem ID 8086-4010
Device Class 0280 (Network Controller)
Revision 81
Fast Back-to-Back Transactions Not Supported
Device Features
66 MHz Operation Not Supported
Bus Mastering Enabled

 

[Oliv1208]

Known Problems

Fade to black after initial installation: Press your brightness up key.

Hi,

Do you have a solution for that ?

Thanks

 

[Jiachen]

Read post #1, "Problem Reporting".

All the files of Zbook 14 G1 is uploaded. Is it possible to make os x 10.11.6 work full functionally on this laptop?

 

[RehabMan]

There is a mistake in my previously uploaded file. I have followed your instruction in "Problem Reporting" and the new corrected file is uploaded on dropbox. Everytime I upload the zip as attachment, the shockwave flash crashes somehow. I'm sorry.
https://www.dropbox.com/s/lxonpf3td6tnt82/HP_ZBook_14_G1_Jiachen.zip?dl=0

Why two different EFI/Clover (Report_1, Report_2)?

 

[RehabMan]

Sorry,I meant bcm94352hbm or bcm94352zhbm and in Aida64 on Windows I found:
Field Value
Device Properties
Device Description Intel Dual Band Wireless-AC 3165 AC HMC WiFi Adapter
Bus Type PCI Express 2.0 x1
Bus / Device / Function 2 / 0 / 0
Device ID 8086-3165
Subsystem ID 8086-4010
Device Class 0280 (Network Controller)
Revision 81
Fast Back-to-Back Transactions Not Supported
Device Features
66 MHz Operation Not Supported
Bus Mastering Enabled

No such thing as BCM94352hbm. Perhaps you mean BCM94352HMB?
Also, no such thing as BCM94352zhbm. Perhaps you mean BCM94352Z?

BCM94352Z is NGFF/M.2 2230.
BCM94352HMB is half-mini PCIe.
Your laptop likely uses NGFF.

 

[RehabMan]

Hi,

Do you have a solution for that ?

Thanks

Don't shutdown the laptop with zero brightness set on the internal display.
If you do, press your brightness up key.

 

[Jiachen]

Why two different EFI/Clover (Report_1, Report_2)?

Since my laptop model is not 8x0_G1, but your patches for 8x0_G1 do enables some features like battery level display, so I made two reports, the Report_1 is no dsdt/plist patched, and the Report_2 is patched with dsdt and plist of 8x0_G1. You can find my discription in description.txt.