[Guide] 10.11+ USB changes and solutions

[RehabMan]

please find the files attached.

thank you

ACPI is not patched correctly.

See guide: https://www.tonymacx86.com/threads/guide-patching-laptop-dsdt-ssdts.152573/

Also, plan on creating a custom SSDT for USBInjectAll.kext.

 

[Gogeta5026]

If anybody can help... That would be great!

Kinda new to this whole .kext thing and what to do. I've seen a lot of guides out there and I'm totally confused.

I have an - ASUS Gryphon Z87 LGA 1150 Intel Z87 board and have 10.12.1 16B2548a installed.
HOW IN THE WORLD DO I GET THE USB 3.0 and all the rest of ports on my board working and the 3 on the computer case?

The motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131977
The computer case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811144298

There's:
4 x USB 3.0 / 4 x USB 2.0 on the board
1 x USB 3.0 / 2 x USB 2.0 on the computer case

If anybody can help with a guide or simply explain what files/kexts I need to install and how... THAT WOULD BE GREAT!

Thank You in advance to the person who can help me out.

Keith Seper
[email protected]

 

[RehabMan]

If anybody can help... That would be great!

Kinda new to this whole .kext thing and what to do. I've seen a lot of guides out there and I'm totally confused.

I have an - ASUS Gryphon Z87 LGA 1150 Intel Z87 board and have 10.12.1 16B2548a installed.
HOW IN THE WORLD DO I GET THE USB 3.0 and all the rest of ports on my board working and the 3 on the computer case?

The motherboard:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131977
The computer case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811144298

There's:
4 x USB 3.0 / 4 x USB 2.0 on the board
1 x USB 3.0 / 2 x USB 2.0 on the computer case

If anybody can help with a guide or simply explain what files/kexts I need to install and how... THAT WOULD BE GREAT!

Thank You in advance to the person who can help me out.

Keith Seper
[email protected]

Read post #1. Especially, "Specific recommendations..."

 

[Gogeta5026]

Read post #1. Especially, "Specific recommendations..."

That is where I'm getting lost/confused. I don't know which route to take and series (7, 8 or 9) I should use.

 

[RehabMan]

That is where I'm getting lost/confused. I don't know which route to take and series (7, 8 or 9) I should use.

Z87 is 8-series.

 

[hagop]

Hi, I have ASUS sabertooth z77 and I did a clean install of Sierra and ran Multibeast UEFI preset, now everything works fine but sometimes when I boot the USB doesn't work until I restart it couple or many times, then it works. anyone who had the same problem can help me? please!

 

[RehabMan]

Hi, I have ASUS sabertooth z77 and I did a clean install of Sierra and ran Multibeast UEFI preset, now everything works fine but sometimes when I boot the USB doesn't work until I restart it couple or many times, then it works. anyone who had the same problem can help me? please!

Never heard of any such problem. No idea what "Multibeast UEFI preset" is. Read post #1, "Problem Reporting". Provide ioreg both the case of working USB and not working USB.

 

[hagop]

I meant UEFI boot mode, and would only be able to post ioreg only when USB is working since my keyboard and mouse is USB. also I just want to also say that booting trough Unibeast, mouse always works, but for both El Capitan and Sierra I had the same unusual USB problems where sometimes it works and sometimes it doesn't based on luck.

 

[RehabMan]

I meant UEFI boot mode, and would only be able to post ioreg only when USB is working since my keyboard and mouse is USB. also I just want to also say that booting trough Unibeast, mouse always works, but for both El Capitan and Sierra I had the same unusual USB problems where sometimes it works and sometimes it doesn't based on luck.

Use remote desktop to get ioreg in non-working USB scenario.

 

[lokicat]

Curious question:

I have a custom SSDT working with @RehabMan injectors. All my USB ports are on XHC and I've disabled 3 ports to stay under the 15 limit. Reading from the first page, can I or should I move USB2 ports to EHC with the multiplex kexts to have all 18 ports working? Or is EHC just an alternative method and not to be used concurrently with the custom SSDT/XHC injection?