toleda
Moderator
- Joined
- May 19, 2010
- Messages
- 22,830
- Motherboard
- Asus Maximus VII Impact
- CPU
- i7-4770K
- Graphics
- RX 560 + HD4600
- Mac
- Classic Mac
- Mobile Phone
9/22/16 - 10.12 Initial Support, 4352/5 GHz patch
See Post #1.
See Post #1.
Post #1, BCM94352 5 GHz/Handoff (10.12 - all versions)Where do I find the config-bcm94352 plist?
Dude, deprecated a year ago. See Post #1.no wifi/bluetooth support with old "bcm4352.kext"
Dude, where is the actual bcm4352 kext? Just installed Sierra, no wifi/bluetooth support with old "bcm4352.kext"
Step 1/Enable WiFi
Airport/WiFi Injection Methods (Select one method)
- kext enabler, see FakePCIID for BCM94352
- README: RehabMan/OS-X-Fake-PCI-ID
- Download: RehabMan / OS-X-Fake-PCI-ID
- kext edit/Info.plist, see [Guide] airport_pcie-hm_plist_edits.pdf (repo)
- dsdt edits, [Guide] airport_pcie-hm_dsdt_edits.pdf (repo)
- ssdt enabler, see airport_ssdt_enabler folder (repo)
- 94352, see ssdt_arpt folder (repo)
- Clover/config.plist/ (Select one method)
- ACPI/DSDT/Fixes (supported device_ids)
- AddDTGP_0001/YESFixAirport_4000/YES
- FixAirport_4000/YES
- Devices/FakeID/0x0 (supported device_ids)
I'm confuzed by the step options... With "Step 1", It says Select one Method, so does it mean there are 5 potential methods? For the other Steps, do i also choose one or do I all the parts?....
I'm on Sierra, got the fcvo patch & both kexts installed. Unfortunately, the card still doesn't show up. It's an Asus PCE-AC56 which is, as per DPCIManager, based on the BCM4352. The device id is 14e4, 43b1. (I even tried adding that to the AirPortBrcm4360 kext). Did I miss a step?Use FakePCIID.kext+FakePCIID_Broadcom_WiFi.kext.
That will get the kext loading (but not starting).
Then you will need the fcvo patch by the-darkvoid. See here: http://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/
That will get the kext starting (but no 5ghz).
Read post #1 to find/construct the correct 5ghz patch (it depends on your region).
I'm on Sierra, got the fcvo patch & both kexts installed. Unfortunately, the card still doesn't show up. It's an Asus PCE-AC56 which is, as per DPCIManager, based on the BCM4352. The device id is 14e4, 43b1. (I even tried adding that to the AirPortBrcm4360 kext). Did I miss a step?
kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda
sudo touch /System/Library/Extensions && sudo kextcache -u /
Use FakePCIID.kext+FakePCIID_Broadcom_WiFi.kext.
That will get the kext loading (but not starting).
Then you will need the fcvo patch by the-darkvoid. See here: http://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/
That will get the kext starting (but no 5ghz).
Read post #1 to find/construct the correct 5ghz patch (it depends on your region).