New VoodooPS2Controller, Keyboard, Trackpad (ClickPad support)

[RehabMan]

i only inject so i can test kexts before installing, i will test to make sure this in not the issue, i still installed the daemon and plist.
Thanks for the help

Please, EFI/Clover only (not EFI). Without 'themes'. As requested.

It will be much smaller than 27mb.

 

[zacnut]

Please, EFI/Clover only (not EFI). Without 'themes'. As requested.

It will be much smaller than 27mb.

I did remove themes, here is just the clover folder from EFI, removed clover drivers also.
Sorry

 

[RehabMan]

I did remove themes, here is just the clover folder from EFI, removed clover drivers also.
Sorry

I didn't ask for Clover drivers to be removed.
Your CLOVER/kexts is wrong. You're injecting FakeSMC.kext twice (not a good idea), once from 10.12 and another in Other... and FakeSMC.kext is old.

Also, please fill out your profile (because at this point, I don't know what hardware you have, nor whether you're booting UEFI or legacy).

Note: I have no experience with AMD graphics, so cannot offer any advice regarding crashes with it. You might disable it (or remove the drivers) to see if the issue goes away..

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[zacnut]

I didn't ask for Clover drivers to be removed.
Your CLOVER/kexts is wrong. You're injecting FakeSMC.kext twice (not a good idea), once from 10.12 and another in Other... and FakeSMC.kext is old.

Also, please fill out your profile (because at this point, I don't know what hardware you have, nor whether you're booting UEFI or legacy).

Note: I have no experience with AMD graphics, so cannot offer any advice regarding crashes with it. You might disable it (or remove the drivers) to see if the issue goes away..

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

Fixed.
I had the latest fakeSMC, but i must have reverted it by mistake when i ran into this issue and i assumed clover would only use 'other' if OS version number was unknown.
I removed drivers as i thought it would not be related and some are unused.

 

[RehabMan]

Fixed.
I had the latest fakeSMC, but i must have reverted it by mistake when i ran into this issue and i assumed clover would only use 'other' if OS version number was unknown.

So, it turned out to be the issue with your FakeSMC setup?

 

[zacnut]

So, it turned out to be the issue with your FakeSMC setup?

no i mean i filled out my profile more..
i have updated fakeSMC and removed it from 'other' though and installed VoodooPS2 as opposed to injecting it and has made no difference
sorry for all the miscommunication

 

[RehabMan]

no i mean i filled out my profile more..
i have updated fakeSMC and removed it from 'other' though and installed VoodooPS2 as opposed to injecting it and has made no difference
sorry for all the miscommunication

Second time: Note: I have no experience with AMD graphics, so cannot offer any advice regarding crashes with it. You might disable it (or remove the drivers) to see if the issue goes away..

 

[zacnut]

Mysteriously working after a permission repair and a reboot...
perhaps injection was the problem and/or just permissions.
Sorry for wasting your time
Remove my posts if you deem them clutter and thank you for your help and work on voodooPS2.

 

[tluck]

I was wondering if anyone has key mapping issues on Sierra? meaning not working?
... my custom F1-F12 key maps and as well as the built-in audio controls (i.e. volume) seem to be ignored?

with the Debug version of PS2keyboard, I can see the same codes are being sent as in 10.11.x for all these keys?

what is the remedy to get F keys or audio buttons working in 10.12?

 

[RehabMan]

I was wondering if anyone has key mapping issues on Sierra? meaning not working?
... my custom F1-F12 key maps and as well as the built-in audio controls (i.e. volume) seem to be ignored?

with the Debug version of PS2keyboard, I can see the same codes are being sent as in 10.11.x for all these keys?

what is the remedy to get F keys or audio buttons working in 10.12?

Known problem. All NX keys are broken in 10.12. Also affects software used on real Macs (Karabiner).