[Success] ASUS Z9PE-D8 WS Dual E5-2620 v2 GTX660Ti 32Gb

[TpwUK]

Finally the gpu works.Thanks!
Now i'm trying to solve the memory problem.
the osx don't recognzie the memory for cpu2,it shows only 4 slots.
when i use 8g *2,the memory data in system monitor seems error.

I assume you are using something like Clover Configurator so you will need to edit the memory definitions in the SMBios area. So you would set your slot count to 8 or however many memory sticks you have installed, and then add the memory definitions to list. If you are using 4x8gb sticks like I am here then they need to be inserted in the 4 outermost slots for each CPU on the motherboard.

Martin

 

[kevin335200]

I assume you are using something like Clover Configurator so you will need to edit the memory definitions in the SMBios area. So you would set your slot count to 8 or however many memory sticks you have installed, and then add the memory definitions to list. If you are using 4x8gb sticks like I am here then they need to be inserted in the 4 outermost slots for each CPU on the motherboard.

Martin

Yes, now all parts get to work.
Thank you very much！

 

[TpwUK]

Yes, now all parts get to work.
Thank you very much！

May i ask what SMBios definition you are using for future reference please ?

Martin

 

[kevin335200]

May i ask what SMBios definition you are using for future reference please ?

Martin

i use MacPro 6,1.Maybe this is the best choice for this build.
No big problem,althrough sometimes OsxAptioFix2Drv crash so i must reboot the computer a few times to make it sucessfully boot.
I cannot use OsxAptioFixDrv.After "+++++++++++" the system will suddenly reboot.
For memory i use the config.plist and ssdt by leonardvv
http://www.tonymacx86.com/threads/x...9pe-d8-ws-12tb-geekbench-28-000.58104/page-92
i am also use 4*8gb so it works for me great.

 

[TpwUK]

No big problem,althrough sometimes OsxAptioFix2Drv crash so i must reboot the computer a few times to make it sucessfully boot.

Yes i get that too, but easily avoided by leaving the computer on 24/7

Martin

 

[Going Bald]

i use MacPro 6,1.Maybe this is the best choice for this build.
No big problem,althrough sometimes OsxAptioFix2Drv crash so i must reboot the computer a few times to make it sucessfully boot.
I cannot use OsxAptioFixDrv.After "+++++++++++" the system will suddenly reboot.
For memory i use the config.plist and ssdt by leonardvv
http://www.tonymacx86.com/threads/x...9pe-d8-ws-12tb-geekbench-28-000.58104/page-92
i am also use 4*8gb so it works for me great.

Have you tried using OsxAptioFixDrv2-free2000? See post 3 http://www.tonymacx86.com/threads/s...iofixdrv-64-osxaptiofixdrv2-64-issues.194997/

 

[kevin335200]

Have you tried using OsxAptioFixDrv2-free2000? See post 3 http://www.tonymacx86.com/threads/s...iofixdrv-64-osxaptiofixdrv2-64-issues.194997/

It seems like a good solution.I will try it.
Thanks！

 

[giacomoleopardo]

Kevin, would you please share your entire EFI partition? Thanks in advance
G

 

[kevin335200]

Kevin, would you please share your entire EFI partition? Thanks in advance
G

here it is:
https://www.dropbox.com/s/xkb53tk0iemebp5/z9pe-d8 ws efi.zip?dl=0
But i have still many things to do with it.This config has many problems.
1. CPU description ist still unknown
2. i don't make usb3.0 to work.
3. i don't check whether the audio is work or not.
i just make the cpu,memory and video to work. i have not so much time these days, but after a few weeks i will manage to get all parts to work.
Not sure if it is also work for you.Be careful.

 

[giacomoleopardo]

Thanks, I'll give it a check. Your hardware?