[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[wi-fi]

I see no "SmartCard" reader in this ioreg. If it is connected to USB (just a guess), boot with -uia_ignore_rmcf and attach ioreg.

Seems that it is a internal USB device. Booting with that flag it appears!
The laptop also have a FingerPrint reader, but that doesn't work with OSX, AFAIK.
Where goes the new ioreg.

 

[RehabMan]

Seems that it is a internal USB device. Booting with that flag it appears!
The laptop also have a FingerPrint reader, but that doesn't work with OSX, AFAIK.
Where goes the new ioreg.

Added HP18 for the smart card reader. Finger print reader is already disabled since it is useless on OS X.

 

[crixster]

@RehabMan...
I've searched the site concerning the correct SMBIOS for Broadwell systems and came to my own conclusion that although About This Mac is reporting Mac Pro (Early 2008), my System is reporting as Macbook Air 7,2. I want MBA7,2 for correct operation.

So really, is About This Mac only a cosmetic report and can be left alone or is something up spoofing the report and it must be changed to reflect the system profiler report for uniformity?

I have included my IOREG so you can take a peek just to confirm or dispute what I'm thinking. I'm researching now how to edit the About This Mac to sync with the system reporting.

Here are the files as specified in Problem Reporting Post #1:

 

[RehabMan]

Here are the files as specified in Problem Reporting Post #1:

You need to provide all SMBIOS data in config.plist/SMBIOS (board-id, BIOS version, etc). There is no direct support in Clover for MacBookAir7,2 so it fills in defaults from MacPro3,1. About this Mac model is based on board-id.

 

[crixster]

You need to provide all SMBIOS data in config.plist/SMBIOS (board-id, BIOS version, etc). There is no direct support in Clover for MacBookAir7,2 so it fills in defaults from MacPro3,1. About this Mac model is based on board-id.

I thought as much. I'll get on it and edit the config.plist, saw some threads earlier concerning this issue with early Broadwell adopters.

Thanks, I'll report further...

 

[taskrov]

RehabMan,

I have be studying your guide in preparation of transition from PBI-CE to installation. I have gone through the steps except any install script just to verify what gets created etc. The first issue I ran into is the build.sh failed since iasl was not installed on my system. I found its zip file in tools folder, unzipped it and copied it to /usr/bin. You may want to add those steps to your guide for people like me.

Since my 4530s is working fine on 10.11.4 I am a bit hesitant to proceed. I am searching the forum for someone who had success with the transition from PBI-CE.

Thanks.

 

[RehabMan]

RehabMan,

I have be studying your guide in preparation of transition from PBI-CE to installation. I have gone through the steps except any install script just to verify what gets created etc. The first issue I ran into is the build.sh failed since iasl was not installed on my system. I found its zip file in tools folder, unzipped it and copied it to /usr/bin. You may want to add those steps to your guide for people like me.

Since my 4530s is working fine on 10.11.4 I am a bit hesitant to proceed. I am searching the forum for someone who had success with the transition from PBI-CE.

Thanks.

You need to run ./install_downloads.sh prior to running ./build.sh (as per guide).

You cannot randomly change the order of the steps in the guide and expect it to work.

My 4530s is working fine with this guide.

 

[taskrov]

You need to run ./install_downloads.sh prior to running ./build.sh (as per guide).

You cannot randomly change the order of the steps in the guide and expect it to work.

My 4530s is working fine with this guide.

---
Thanks, got it. I neglected to examine contents of install_downloads.sh; was not trying to be random, just cautios.

 

[Sevift]

You forgot a model specific SSDT. Use install_acpi.sh as per guide.

Thank you. It helped.

 

[iHermno]

nice guide rehabman, i do really like repo based updates.
so far i've transfered from nguyen guide to this successfully but only issue is audio.
idk what to do tried everything you've said in first post and old methods using nguyen thread yet nothing works,
well done again for this well written thread.