Fail to boot on USB with unibeast

[Rasputine]

Thanks a lot for helping me out.
I am using the 4600 intel integrated, no other video card. And I am using the 4600 setting as suggested on the unibeast creation tool.

 

[ammulder]

If you're still having trouble, please post your config.plist

 

[Rasputine]

If you're still having trouble, please post your config.plist

Thanks. I am now trying to mount the hidden EFI partition on windows. Will try Linux next.

 

[Rasputine]

Finally been able to access the EFI partition from Windows and edit the config.plist. (I used Ext2FSD)

I changed the FixDisplay_0100 to true as suggested but didn't work.

I really don't get it. I am using a super compatible box, picked from the buyer guide, with only board, cpu and disk, which was working fine with Maverick and Yosemite.

 

[Rasputine]

Arcticfox had success with a box like mine.

Can I replace my /EFI dir with his without ruining the installer?

 

[ammulder]

Generally, yes, though stuff in CLOVER/ACPI/patched/ (if any) may or may not work depending on how exact a match your board is (model, BIOS, etc.).

If you don't want to do that, or that doesn't work, then we should take this from the top -- list everything under EFI/CLOVER/kexts/ and in EFI/CLOVER/drivers64UEFI/ . Also, are you booting off a USB drive or system drive? Have you ever gotten to the installer or not? Did you create the install USB with UniBeast 6.0.1? If so, you did set it up for a UEFI install, right?

 

[Rasputine]

Thanks a lot ammulder for the kind support.

Generally, yes, though stuff in CLOVER/ACPI/patched/ (if any) may or may not work depending on how exact a match your board is (model, BIOS, etc.).

I can replace the /EFI and try, right? It's just files on a fat32 file system

If you don't want to do that, or that doesn't work, then we should take this from the top -- list everything under EFI/CLOVER/kexts/ and in EFI/CLOVER/drivers64UEFI/ . Also, are you booting off a USB drive or system drive? Have you ever gotten to the installer or not? Did you create the install USB with UniBeast 6.0.1? If so, you did set it up for a UEFI install, right?

Booting from USB. Never got to the installer. On the past worked just fine, only El Capitan (I was doing a clean install this time) Yes, Unibest 6.0.1, Yes, set up fot UEFI....

 

[Rasputine]

I've tried the ArcticFox's EFI pack but with no luck, at some point the screen turn gibbery and installer doesn't load also.

 

[Rasputine]

I think I am here:

Haswell Integrated Graphics Don't Start

• Often a hang or reboot after hfs: set VeryLowDisk: vol:untitled
• Often several lines after Missing Bluetooth Controller Transport
• No solution yet
  • Try Clover Configurator / ACPI / FixDisplay
  • Confirm Inject Intel = true

Fixdisplay: failed
Inject Intel: true

 

[Rasputine]

I finally got the installer to load! I noticed ArtictFox's bios image said 2014 and mines 2013, so... I upgraded the BIOS!!! Maybe this should be added to "Haswell Integrated Graphics Don't Start" list.
Also changed the pen to a different usb port (directly on the board, in the back, and not in the front panel)