- Joined
- Feb 21, 2015
- Messages
- 11
- Motherboard
- Yosemite
- CPU
- Intel Core i7-4790K
- Graphics
- MSI GeForce GTX 750Ti 2GB PhysX CUDA
- Mac
- Classic Mac
- Mobile Phone
Hello,
I have installed Yosemite on my SSD and I can start my computer with "dart=0 PCIRootUID=1 nv_disable=1 GraphicsEnabler=No -v" The problem I am having is that the screen lags. The mouse stand still and will not move some times. When I logg inn and my desktop appears the picture flickers and white lines goes from the bottom to the top several times before the desktop appears. I have no idea why this happens.
I have been searching the forum for information and i found some links where people using my motherboard and CPU have made it work. http://www.tonymacx86.com/mavericks...-4790k-16gb-ram-intel-hd-graphics-4600-a.html
I tried to use the same MultiBeast setting as him but it did not work.
When I am using the -v and -v-x i get the message "Unknown CPU models 0x3c" And something about that my power supply is not identified and might can not be used. I have been in the BIOS and disabled vt-d.
I see at this post that he had to Update BIOS to F5, Turn VT-d off, Turn IGFX on and enabled, Set X.M.P. Memory Profile to Profile1 and Set USB stick to Boot Priority #1, SSD to priority #2 before installing Yosemite. Is things like this important before installing or can I do they after installation? He also installed Yosemite without the graphic card inserted. Is also this important? http://www.tonymacx86.com/yosemite-...-geforce-gtx-970-2-0-sc-yosemite-install.html
I am currently using:
Intel Core i7-4790KMSI GeForce
GTX 750Ti 2GB PhysX CUDA
Corsair Vengeance DDR3 1600MHz 8GB CL10
Corsair CX 750M, 750W PSU
Corsair H60 Hydro Series CPU cooler
Gigabyte GA-Z97M-D3H, Socket-1150
Kingston SSDNow V300 240GB 2.5" OEM
I have installed Yosemite on my SSD and I can start my computer with "dart=0 PCIRootUID=1 nv_disable=1 GraphicsEnabler=No -v" The problem I am having is that the screen lags. The mouse stand still and will not move some times. When I logg inn and my desktop appears the picture flickers and white lines goes from the bottom to the top several times before the desktop appears. I have no idea why this happens.
I have been searching the forum for information and i found some links where people using my motherboard and CPU have made it work. http://www.tonymacx86.com/mavericks...-4790k-16gb-ram-intel-hd-graphics-4600-a.html
I tried to use the same MultiBeast setting as him but it did not work.
When I am using the -v and -v-x i get the message "Unknown CPU models 0x3c" And something about that my power supply is not identified and might can not be used. I have been in the BIOS and disabled vt-d.
I see at this post that he had to Update BIOS to F5, Turn VT-d off, Turn IGFX on and enabled, Set X.M.P. Memory Profile to Profile1 and Set USB stick to Boot Priority #1, SSD to priority #2 before installing Yosemite. Is things like this important before installing or can I do they after installation? He also installed Yosemite without the graphic card inserted. Is also this important? http://www.tonymacx86.com/yosemite-...-geforce-gtx-970-2-0-sc-yosemite-install.html
I am currently using:
Intel Core i7-4790KMSI GeForce
GTX 750Ti 2GB PhysX CUDA
Corsair Vengeance DDR3 1600MHz 8GB CL10
Corsair CX 750M, 750W PSU
Corsair H60 Hydro Series CPU cooler
Gigabyte GA-Z97M-D3H, Socket-1150
Kingston SSDNow V300 240GB 2.5" OEM