- Joined
- Sep 20, 2012
- Messages
- 37
- Motherboard
- GA-Z97-D3H RETAIL
- CPU
- INTEL CORE I5-4460 3.20GHZ
- Graphics
- GT740 GT740-2GD3 2GB DDR3 PCI-E
- Mac
- Classic Mac
- Mobile Phone
Hardware
Bios Configuration
Multibeast 7.2 Configuration
The installation went fine. After running Multibeast and choosing the above settings, whenever i restart i get a black screen. I have to shut down the system (power button) and after 2-3 tries it will load just fine.
Also on the loading screen, the loading bar takes about 10 minutes reach 100%.
And last but not least, when after Multibeast settings and restarting, the network doesnt work at all.
What am i doing wrong?
Code:
- RAM CRUCIAL BLS4G3D1609DS1S00 BALLISTIX 4GB DDR3 PC3-12800 1600MHZ
- VGA ASUS GEFORCE GT740 GT740-2GD3 2GB DDR3 PCI-E RETAIL
- SSD SAMSUNG MZ-75E120B/EU 850 EVO SERIES 120GB 2.5'' SATA3
- GIGABYTE GA-Z97-D3H RETAIL
- CPU INTEL CORE I5-4460 3.20GHZ LGA1150 - BOX
Code:
[COLOR=#000000]- Load Optimised Defaults[/COLOR]
[COLOR=#000000]- Advanced Memory Settings: XMP Profile 1[/COLOR]
[COLOR=#000000]- VT-d disabled[/COLOR]
[COLOR=#000000]- XHCI Mode Auto[/COLOR]
[COLOR=#000000]- Intel Processor Graphic disabled[/COLOR]
[COLOR=#000000]- XHCI Hand-Off Enabled[/COLOR]
[COLOR=#000000]- EHCI Hand-Off Enabled[/COLOR]
[COLOR=#000000]- SATA Configuration AHCI
[/COLOR]
Multibeast 7.2 Configuration
Code:
[COLOR=#000000]Quick Start > DSDT Free[/COLOR]
[COLOR=#000000]Drivers > Audio > Realtek ALCxxx > ALC1150[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 Plugins[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application[/COLOR]
[COLOR=#000000]Drivers > Intel > AppleIntelE1000e v3.1.0[/COLOR]
[COLOR=#000000]Drivers > System > AppleRTC Patch for CMOS Reset[/COLOR]
[COLOR=#000000]Bootloaders > Chimera v3.0.1[/COLOR]
[COLOR=#000000]Customize > Boot Options > Basic Boot Options[/COLOR]
[COLOR=#000000]Customize > Boot Options > Generate CPU States[/COLOR]
[COLOR=#000000]Customize > Boot Options > Hibernate Mode - Desktop[/COLOR]
[COLOR=#000000]Customize > Boot Options > Use KernelCache[/COLOR]
[COLOR=#000000]Customize > System Definitions > Mac Pro > Mac Pro 3,1[/COLOR]
[COLOR=#000000]Customize > Themes > tonymacx86 Black[/COLOR]
The installation went fine. After running Multibeast and choosing the above settings, whenever i restart i get a black screen. I have to shut down the system (power button) and after 2-3 tries it will load just fine.
Also on the loading screen, the loading bar takes about 10 minutes reach 100%.
And last but not least, when after Multibeast settings and restarting, the network doesnt work at all.
What am i doing wrong?