Contribute
Register

Z97-D3H + Yosemite + Multibeast 7.2 = Black Screen

Status
Not open for further replies.
Inje

Inje

Joined
Sep 20, 2012
Messages
37
Motherboard
GA-Z97-D3H RETAIL
CPU
INTEL CORE I5-4460 3.20GHZ
Graphics
GT740 GT740-2GD3 2GB DDR3 PCI-E
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hardware
Code: 
- RAM CRUCIAL BLS4G3D1609DS1S00 BALLISTIX 4GB DDR3 PC3-12800 1600MHZ    
- VGA ASUS GEFORCE GT740 GT740-2GD3 2GB DDR3 PCI-E RETAIL  
- SSD SAMSUNG MZ-75E120B/EU 850 EVO SERIES 120GB 2.5'' SATA3    
- GIGABYTE GA-Z97-D3H RETAIL  
- CPU INTEL CORE I5-4460 3.20GHZ LGA1150 - BOX
Bios Configuration

Code: 
[COLOR=#000000]- Load Optimised Defaults[/COLOR]
[COLOR=#000000]- Advanced Memory Settings: XMP Profile 1[/COLOR]
[COLOR=#000000]- VT-d disabled[/COLOR]
[COLOR=#000000]- XHCI Mode Auto[/COLOR]
[COLOR=#000000]- Intel Processor Graphic disabled[/COLOR]
[COLOR=#000000]- XHCI Hand-Off Enabled[/COLOR]
[COLOR=#000000]- EHCI Hand-Off Enabled[/COLOR]
[COLOR=#000000]- SATA Configuration AHCI
[/COLOR]

Multibeast 7.2 Configuration
Code: 
[COLOR=#000000]Quick Start > DSDT Free[/COLOR]
[COLOR=#000000]Drivers > Audio > Realtek ALCxxx > ALC1150[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 Plugins[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application[/COLOR]
[COLOR=#000000]Drivers > Intel > AppleIntelE1000e v3.1.0[/COLOR]
[COLOR=#000000]Drivers > System > AppleRTC Patch for CMOS Reset[/COLOR]
[COLOR=#000000]Bootloaders > Chimera v3.0.1[/COLOR]
[COLOR=#000000]Customize > Boot Options > Basic Boot Options[/COLOR]
[COLOR=#000000]Customize > Boot Options > Generate CPU States[/COLOR]
[COLOR=#000000]Customize > Boot Options > Hibernate Mode - Desktop[/COLOR]
[COLOR=#000000]Customize > Boot Options > Use KernelCache[/COLOR]
[COLOR=#000000]Customize > System Definitions > Mac Pro > Mac Pro 3,1[/COLOR]
[COLOR=#000000]Customize > Themes > tonymacx86 Black[/COLOR]

The installation went fine. After running Multibeast and choosing the above settings, whenever i restart i get a black screen. I have to shut down the system (power button) and after 2-3 tries it will load just fine.

Also on the loading screen, the loading bar takes about 10 minutes reach 100%.

And last but not least, when after Multibeast settings and restarting, the network doesnt work at all.

What am i doing wrong?
 
Inje said:
Hardware
Code: 
- RAM CRUCIAL BLS4G3D1609DS1S00 BALLISTIX 4GB DDR3 PC3-12800 1600MHZ    
- VGA ASUS GEFORCE GT740 GT740-2GD3 2GB DDR3 PCI-E RETAIL  
- SSD SAMSUNG MZ-75E120B/EU 850 EVO SERIES 120GB 2.5'' SATA3    
- GIGABYTE GA-Z97-D3H RETAIL  
- CPU INTEL CORE I5-4460 3.20GHZ LGA1150 - BOX
Click to expand...

Update your build's hardware details under Profile > Basic Information section in the below format (Profile link is available on the upper right side of this website), So that we can avoid scroll back to your fist post for identifying the hardware details.

System : Motherboard + Bootloader(Clover/Chameleon/Chimera)
CPU : Detailed CPU Model
Graphics : All Graphics Devices

For Example,
System : GA-EP43T-USB3 (Chameleon)
CPU: Intel Quad Core Q8400
Graphics : ZOTAC GeForce 240GT


Multibeast 7.2 Configuration

Code: 
[COLOR=#000000]Quick Start > DSDT Free[/COLOR]
[COLOR=#000000]Drivers > Audio > Realtek ALCxxx > ALC1150[/COLOR]
[COLOR=#000000]Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 Plugins[/COLOR]
[COLOR=#000000]Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application[/COLOR]
[COLOR=#000000]Drivers > Intel > AppleIntelE1000e v3.1.0[/COLOR]
[COLOR=#000000]Drivers > System > AppleRTC Patch for CMOS Reset[/COLOR]
[COLOR=#000000]Bootloaders > Chimera v3.0.1[/COLOR]
[COLOR=#000000]Customize > Boot Options > Basic Boot Options[/COLOR]
[COLOR=#000000]Customize > Boot Options > Generate CPU States[/COLOR]
[COLOR=#000000]Customize > Boot Options > Hibernate Mode - Desktop[/COLOR]
[COLOR=#000000]Customize > Boot Options > Use KernelCache[/COLOR]
[COLOR=#000000]Customize > System Definitions > Mac Pro > Mac Pro 3,1[/COLOR]
[COLOR=#000000]Customize > Themes > tonymacx86 Black[/COLOR]
Click to expand...

Above mentioned details are not from Multibeast 7.2

Download Multibeast 7.2.0 then install with proper selections (Leave the kernel cache option)
 
Jithin's Gaming Build
Z390 UD |  i7 9700K |  RX 580 Pulse 8GB
Jithin's Development Build
GA-Z170X-Gaming 3 |  i7 6700 |  RX 580 Pulse 8GB
You are right :) I'm back on my PC now, and I couldn't copy paste the information i've used for Multibeast 7.2, so i've pasted the same info i've found from another user here on tonymac
 
Inje said:
You are right :) I'm back on my PC now, and I couldn't copy paste the information i've used for Multibeast 7.2, so i've pasted the same info i've found from another user here on tonymac
Click to expand...

There is an option for saving the configuration as a file, then you can attach the file here. Or you can take screen shot then you can attach the picture here.

As you have done the installation with MB 7.2. Boot with flag -f and check the booting. Post the result.
 
Jithin's Gaming Build
Z390 UD |  i7 9700K |  RX 580 Pulse 8GB
Jithin's Development Build
GA-Z170X-Gaming 3 |  i7 6700 |  RX 580 Pulse 8GB
MultiBeast Configuration - 2015-04-09 07:49:19-----------------------------------------------------------------Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.14.1364
Drivers > Misc > FakeSMC v6.14.1364 Plugins
Drivers > Misc > FakeSMC v6.14.1364 HWMonitor
ApplicationDrivers > Network > Intel > AppleIntelE1000e v3.1.0a
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v4.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode -
DesktopCustomize > System Definitions > Mac Pro > Mac Pro 3,1Customize > Themes > tonymacx86 Black
 
Inje said:
MultiBeast Configuration - 2015-04-09 07:49:19-----------------------------------------------------------------Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.14.1364
Drivers > Misc > FakeSMC v6.14.1364 Plugins
Drivers > Misc > FakeSMC v6.14.1364 HWMonitor
ApplicationDrivers > Network > Intel > AppleIntelE1000e v3.1.0a
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v4.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode -
DesktopCustomize > System Definitions > Mac Pro > Mac Pro 3,1Customize > Themes > tonymacx86 Black
Click to expand...

Your profile is not yet updated as requested on post#2

I cannot see the kext-dev-mode option on the above multibeast selections.

What is happening while trying to boot from HDD after multibeast installation??
 
Jithin's Gaming Build
Z390 UD |  i7 9700K |  RX 580 Pulse 8GB
Jithin's Development Build
GA-Z170X-Gaming 3 |  i7 6700 |  RX 580 Pulse 8GB
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top