Yosemite ALC 1150 problem with sound

[Emig0]

Hello everybody!

I have a Yosemite 10.10.2 on the following hardware:

Gigabyte Z97-D3H (ALC1150) and Core-i5 4690.

So, all things work but I have a little problem with my integrated ALC1150 audio. The problem is something noise and crisp sometimes. At the post install in MultiBeast I have checked Realtek ALC1150 and HDAEnabler Audio ID: 1. It doesnt matter if I plug the green jack on the back side or on the front side (to the case)

 

[Emig0]

Heeeeeeeeeeeeelp, pleeeeeeease!!!

 

[TRH]

Hi Emigo

I have recently built a 10.10.1 machine and patched to 10.10.2 - I used the MultiBeast 7.2 postinstall tool and Selected the following
Quick Start> DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > optional HDAEnabler > Audio ID:1
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Misc > FakeSMC v6.11.1328
Bootloaders > Chimera v4.0.1
The following customize boot options for my config
1080p Display Mode
Basic Boot Options
Generate CPU States
Hibernate Mode - Desktop
Kext Dev Mode
Use KernelCache
System Definitions iMac 15,1

the other thing that was set in the bootplist was <string>kext-dev-mode=1</string>

No problems with getting the sound running from bootup however I do still have the issue with waking from sleep and no sound. Currently trying to find a remedy for that issue, it seems several people hit the same issue and there are some might inteligent people out there that have solutions however currently I have found nothing that works. Workaround is to reload the ALC1150 driver and the Audio ID = 1 via MultiBeast ....