- Joined
- Nov 23, 2018
- Messages
- 10
- Motherboard
- XPS 13
- CPU
- I7-8550U
- Graphics
- Intel 620
thanks @RehabMan and @Feartech !
So I added the "CoolStar patches for I2C" and configured a LiluFriend.kext that contains all Lilu plugins within that .kext (as recommend by the author) I'm not 100% correct I did all correctly, as I did some small things differently like changed the default <string>12.0.0</string> to <string>18.2.0</string> for the pre-loaded: om.apple.kpi.bsd, com.apple.kpi.dsep, com.apple.kpi.iokit, com.apple.kpi.libkern, com.apple.kpi.mach, com.apple.kpi.unsupported, since that is what my system shows for those. I also changed the BuildMachineOSBuild of "16E185" to match my build of "18B75"
Anyhow, now my trackpad and thunderbolt port is working again, yay!
One thing I did notice though, is that when I look in system information for kext files I see that the following are not loaded: AppleBacklightInjector, CPUFriendDataProvider, FakePCIID_Broadcom_WiFi, UVC2FaceTimeHD (have webcam disabled, so don't care for facetime) Even though those show "no" for "loaded" my backlight, wifi work fine. Is the "loaded/no" normal? All show "dependencies" "satisfied" I attached a photo.
Lastly, regarding my original issue of this post, nothing has changed and the computer still artificially limits power to keep the cpu freq low, so that fans don't kick on when running intensive task like prime95. Actually it's slightly lower max sustain at 1.8 now, vs 2.0 before. I attached an image that shows the boost to 4.0 which lasted for about 4 seconds, then crashes to 1.8, where it stays, at 64c with the fans off.. (my cooing is upgraded which is why it can handle sustained 1.8ghz at 64c without fans) Cinebench score now 478 whereas before i was at least getting 540 or higher
Attached is my new debug files. Thanks again for all the help, really appreciate it.
So I added the "CoolStar patches for I2C" and configured a LiluFriend.kext that contains all Lilu plugins within that .kext (as recommend by the author) I'm not 100% correct I did all correctly, as I did some small things differently like changed the default <string>12.0.0</string> to <string>18.2.0</string> for the pre-loaded: om.apple.kpi.bsd, com.apple.kpi.dsep, com.apple.kpi.iokit, com.apple.kpi.libkern, com.apple.kpi.mach, com.apple.kpi.unsupported, since that is what my system shows for those. I also changed the BuildMachineOSBuild of "16E185" to match my build of "18B75"
Anyhow, now my trackpad and thunderbolt port is working again, yay!
One thing I did notice though, is that when I look in system information for kext files I see that the following are not loaded: AppleBacklightInjector, CPUFriendDataProvider, FakePCIID_Broadcom_WiFi, UVC2FaceTimeHD (have webcam disabled, so don't care for facetime) Even though those show "no" for "loaded" my backlight, wifi work fine. Is the "loaded/no" normal? All show "dependencies" "satisfied" I attached a photo.
Lastly, regarding my original issue of this post, nothing has changed and the computer still artificially limits power to keep the cpu freq low, so that fans don't kick on when running intensive task like prime95. Actually it's slightly lower max sustain at 1.8 now, vs 2.0 before. I attached an image that shows the boost to 4.0 which lasted for about 4 seconds, then crashes to 1.8, where it stays, at 64c with the fans off.. (my cooing is upgraded which is why it can handle sustained 1.8ghz at 64c without fans) Cinebench score now 478 whereas before i was at least getting 540 or higher
Attached is my new debug files. Thanks again for all the help, really appreciate it.
Attachments
Last edited: