- Joined
- Apr 15, 2011
- Messages
- 20
- Motherboard
- Z690M AORUS ELITE DDR4
- CPU
- i9-12900KF
- Graphics
- RX570
- Mac
- Mobile Phone
What is this sentence mean? Some DSDT edits are needed?if you're already in the 5th Slot and using a DSDT try the first Slot
( Sorry, I'm not good at English. )
I didn't notice this configuration. It was disabled. Thanks!Oh and be sure to activate IO Acceleration Technology in BIOS!
Sadly, situation did not changed when it enabled.
I found "Enable C6" was enabled in clover configuration, so I disabled it.
( I had to specify "false" to disable it. )
So IOAPIC stuck is solved, now stuck at "PCI Configuration Begin" and "mbinit".
My Z9PA-D8's PCIe x16 are slot 2 and slot 4. But both has same behavior.
I think this problem is caused by PCIe connection configuration of motherboard.
http://dlcdnet.asus.com/pub/ASUS/mb/LGA2011/Z9PE-D8-WS/Manual/C7254_Z9PE-D8_WS.PDF
http://dlcdnet.asus.com/pub/ASUS/mb/Socket2011/Z9PA-D8/Manual&QVL/E7572_Z9PA-D8_for_web.pdf
Comparing these block diagrams, Z9PE-D8 slot 1,2,3,4 are connected to CPU1 via ASM1480, and slot 5,6,7 are connected to CPU2 directly.
But in Z9PA-D8, all slots except slot 5 are connected to CPU1 via ASM1480.
And slot 5 is PCIe x8 and connected to PCH, so I think it's unusable for GPU.
I don't know what is the problem, but if CPU1 or ASM1480 causes problem, it means there is no solution for Z9PA-D8...