- Joined
- Nov 20, 2012
- Messages
- 166
- Motherboard
- Asus Maximus Viii Gene
- CPU
- Intel i7 6700k
- Graphics
- Evga 980Ti Classified
- Mac
- Classic Mac
- Mobile Phone
Hi there everyone!!!
Here is my finished revision for my G5 mod.
Components:
Case: Apple Power Mac G5 Late 2004 Model
Motherboard: Asus Maximus VIII Gene
Cpu: i7 6700k
Ram: Avexir Blitz Series 16gb DDR4 3200Mhz
Storage: Samsung 840 Evo 120Gb SSD, 1Tb Toshiba 2.5" HDD, 1Tb 3.5" HDD Seagate Barracuda
Gpu: Nvidia EVGA GTX 980Ti Classified
LCS: Thermaltake Liquid Cooling System
Fans: Thermaltake Red Led Riing and Luna (all red led)
Psu: Corsair RM850 with custom sticker and custom sleeved cables from CableMods
Filters: Customized Filters from DEMCIFILTER
Back Panel and Motherboard Tray from Laser Hive
I made my custom PSU Shroud and Cable Cover Plate and SHIELD Logo using 3mm thick Acrylic Sheets and was laser cut. PSU Shroud was bended using heat gun. Dremel for excess parts.
Photos:
View attachment Juvs5DM2-103-3136 copy.jpgView attachment Juvs5DM2-103-3215 copy.jpg
and the original side panel gutted the middle part to make it window side panel... measurement for the window is 267mm x 400mm if you will follow the guide for the latch system as shown on my photo. diameter for the corner is 20mm.
Thank you so much for viewing...
Here is my finished revision for my G5 mod.
Components:
Case: Apple Power Mac G5 Late 2004 Model
Motherboard: Asus Maximus VIII Gene
Cpu: i7 6700k
Ram: Avexir Blitz Series 16gb DDR4 3200Mhz
Storage: Samsung 840 Evo 120Gb SSD, 1Tb Toshiba 2.5" HDD, 1Tb 3.5" HDD Seagate Barracuda
Gpu: Nvidia EVGA GTX 980Ti Classified
LCS: Thermaltake Liquid Cooling System
Fans: Thermaltake Red Led Riing and Luna (all red led)
Psu: Corsair RM850 with custom sticker and custom sleeved cables from CableMods
Filters: Customized Filters from DEMCIFILTER
Back Panel and Motherboard Tray from Laser Hive
I made my custom PSU Shroud and Cable Cover Plate and SHIELD Logo using 3mm thick Acrylic Sheets and was laser cut. PSU Shroud was bended using heat gun. Dremel for excess parts.
Photos:
View attachment Juvs5DM2-103-3136 copy.jpgView attachment Juvs5DM2-103-3215 copy.jpg
and the original side panel gutted the middle part to make it window side panel... measurement for the window is 267mm x 400mm if you will follow the guide for the latch system as shown on my photo. diameter for the corner is 20mm.
Thank you so much for viewing...
Attachments
Last edited by a moderator: