Hello,
i have the nearly the same issue with clover 4630 and 10.13.6.
Feels like it is the same problem.
At first i made a clean install. And the build was running with usb2.0 only.
The boot was very fast. When plugging something in a usb3.0 port, all usb stops working
External drives only mounts via restart... After a while randomly the usb stops working without attching something.
And now it became more worse: when i start clover, usb mouse and keyboard is working fine.
I can make inputs to clover - clover still boots very fast.
But only in clover and windows7 the mouse and keyboard is fine now.
After choosing mac in clover and hitting enter, it disconnects the hole usb ports!
When the apple system starts, usb mouse and keyboard stop working in the first seconds of boot - i see that all led lights become off in the first seconds when mac os is booting.
After weeks of loosing time i give up now, and need help!!!!
I tried usbinjectall, with and without dsdt, a lot of config editing, try and error booting like crazy..
At last i tried clover 4895 - but that does not boot macos at all
Nothing helps to get my usb back to work. Even if i load the config that was working at first, it is not working anymore
I looked into my log of clover build. Where i found some lines, that may be cause the problem (see below).
But i do not know what i can do now??? i am trying since End of Dezember to get it working...
The machine was running very good with 10.8.5 and chimera (the 10.8.5 hack is still working great when changing disks).
And when is boot into macos installer via clover usb stick, the mouse and keys are working again.
I am totally confused now what could help. I hope somebody can tell us the problem or what we do wrong. I guess when u got similar problem, the issue is not bios related - may be its only some lines in the config file or a kext???
I hope you can help me to rescue my install.
Code:
0:100 0:100 MemLog inited, TSC freq: 3491913652
0:100 0:000 CPU was calibrated with ACPI PM Timer
0:100 0:000
0:100 0:000 Now is 17.3.2019, 6:27:50 (GMT)
0:100 0:000 Starting Clover revision: 4630 on American Megatrends EFI
0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/macman/src/edk2/Conf -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.13.6 | XCODE: 9.4.1]
Could that be the problem?
Did i made the mistake there?
Help