Contribute
Register

USB randomly ejects / turning off/on

Status
Not open for further replies.
oh, I'm asking because mine is GA-Z97X-UD3H. Forgot to remind that.

I'm planning to get another GA-Z97X-UD3H, same board.
 
bartek.chlebek said:
oh, I'm asking because mine is GA-Z97X-UD3H. Forgot to remind that.

I'm planning to get another GA-Z97X-UD3H, same board.
Click to expand...

Then yes should be fine. If i was another board for example H97M-D3H then no ports will most likely be different.
 
Almost…
hackintosh wakes from sleep by itself after around 30 minutes.
log says
Code: 
2016-11-11 05:23:12.932231+0100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: RTC (Alarm)
2016-11-11 05:23:12.932231+0100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: RTC (Alarm)

Any hints?

Oh, also after this wake, UI has severe artifacts (black status bar, some windows are solid white etc.)
 
bartek.chlebek said:
Almost…
hackintosh wakes from sleep by itself after around 30 minutes.
log says
Code: 
2016-11-11 05:23:12.932231+0100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: RTC (Alarm)
2016-11-11 05:23:12.932231+0100  localhost kernel[0]: (AppleACPIPlatform) Wake reason: RTC (Alarm)

Any hints?

Oh, also after this wake, UI has severe artifacts (black status bar, some windows are solid white etc.)
Click to expand...

Do you have Wake up on Lan enabled? Verify that Power Nap is disabled.
 
Yea, both wake for ethernet and power nap were enabled. Must have forgotten to disable after reinstall.
Thanks
 
bartek.chlebek said:
Yea, both wake for ethernet and power nap were enabled. Must have forgotten to disable after reinstall.
Thanks
Click to expand...

Thats good. But did you add change XWAK to ZWAK in config under DSDT, Patches? SSDT-XWAK won't have no affect without it.
 
Add this to Config. Attach work once done. Note don't use Clover Configurator.

change XWAK to ZWAK
Find <5857414b>
Replace <5a57414b>
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top