USB randomly ejects / turning off/on

[VioletDragon]

Ok, I think I'm done.
Just a question, what about my Kext Patches? Should they stay?

Attach config youve made edits to.

 

[bartek.chlebek]

There you go

 

[VioletDragon]

There you go

Don't really need external icons patch only needed if you have Hotplug enabled in the BIOS. Leave change 15 port limit to 20 in XHCI kext (9-series) & AppleUSBXHCIPCI in config until youve personalised a SSDT for USB. Recommend changing XHCI to enabled to route USB 2 through XHCI. Reboot with the work you've done. Attach ioreg and Clover folder removing themes.

 

[bartek.chlebek]

Had to set HXCI to Auto, on Enabled USB didn't work.
Ok, rebooted and a fresh ioreg:

 

[VioletDragon]

Had to set HXCI to Auto, on Enabled USB didn't work.
Ok, rebooted and a fresh ioreg:

USB won't work until you've created a SSDT for USB. Everything looks fine except X86PlatformPlugin isn't loaded. You need to create a SSDT for Powermanagement. Once doing that report back with ioreg. Follow Quick Guide to Generate a SSDT for CPU Power Management

 

[bartek.chlebek]

ok, all done (didn't test it though, should I? ok tested eventually)

Spoiler: power states

AppleIntelInfo.kext v1.2 Copyright © 2012-2015 Pike R. Alpha. All rights reserved

Settings:
------------------------------------
logMSRs............................: 1
logIGPU............................: 0
logIntelRegs.......................: 1
logCStates.........................: 1
logIPGStyle........................: 1
InitialTSC.........................: 0xc459b874b9
MWAIT C-States.....................: 270624

Model Specific Regiters
------------------------------------
MSR_CORE_THREAD_COUNT......(0x35) : 0x40008
MSR_PLATFORM_INFO..........(0xCE) : 0x80838F3012800
MSR_PMG_CST_CONFIG_CONTROL.(0xE2) : 0x1E000005
MSR_PMG_IO_CAPTURE_BASE....(0xE4) : 0x1814
IA32_MPERF.................(0xE7) : 0x2E0BB83BEE
IA32_APERF.................(0xE8) : 0x47F2F43F71
MSR_FLEX_RATIO.............(0x194) : 0xE0000
MSR_IA32_PERF_STATUS.......(0x198) : 0x27A000002C00
MSR_IA32_PERF_CONTROL......(0x199) : 0x2C00
IA32_CLOCK_MODULATION......(0x19A) : 0x0
IA32_THERM_STATUS..........(0x19C) : 0x88330000
IA32_MISC_ENABLES..........(0x1A0) : 0x850089
MSR_MISC_PWR_MGMT..........(0x1AA) : 0x1
MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x2C2C2C2C
IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x1
MSR_POWER_CTL..............(0x1FC) : 0x4005F
MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
MSR_PKG_POWER_LIMIT........(0x610) : 0xFFD00000EA82
MSR_PKG_ENERGY_STATUS......(0x611) : 0x518B185
MSR_PKG_POWER_INFO.........(0x614) : 0x2C0
MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x1F40
MSR_PP0_POWER_LIMIT........(0x638) : 0xFFD0
MSR_PP0_ENERGY_STATUS......(0x639) : 0x3C327A5
MSR_PP0_POLICY.............(0x63a) : 0x0
MSR_CONFIG_TDP_NOMINAL.....(0x648) : 0x28
MSR_CONFIG_TDP_LEVEL1......(0x649) : 0x0
MSR_CONFIG_TDP_LEVEL2......(0x64a) : 0x0
MSR_CONFIG_TDP_CONTROL.....(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.(0x64c) : 0x0
MSR_PKGC3_IRTL.............(0x60a) : 0x8842
MSR_PKGC6_IRTL.............(0x60b) : 0x8873
MSR_PKGC7_IRTL.............(0x60c) : 0x8891
MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x46EE8941F0
MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
MSR_PKG_C7_RESIDENCY.......(0x3fa) : 0x0
IA32_TSC_DEADLINE..........(0x6E0) : 0xC45BC73D57

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 800 MHz
CPU Maximum non-Turbo Frequency....: 4000 MHz
CPU Maximum Turbo Frequency........: 4400 MHz
CPU P-States [ (8) 42 44 ]
CPU C3-Cores [ 0 6 7 ]
CPU C6-Cores [ 0 1 2 3 5 7 ]
CPU C7-Cores [ 0 1 4 5 7 ]
CPU P-States [ (8) 36 42 44 ]
CPU C3-Cores [ 0 2 3 6 7 ]
CPU C7-Cores [ 0 1 2 4 5 7 ]
CPU P-States [ 8 36 (40) 42 44 ]
CPU C3-Cores [ 0 2 3 4 5 6 7 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU C7-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 36 (40) 41 42 44 ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ (8) 32 36 40 41 42 44 ]
CPU P-States [ (8) 32 33 36 40 41 42 44 ]
CPU P-States [ (8) 32 33 35 36 40 41 42 44 ]
CPU P-States [ (8) 22 32 33 35 36 40 41 42 44 ]
CPU P-States [ 8 22 29 32 33 35 36 40 41 42 (44) ]
CPU P-States [ (8) 22 27 29 32 33 35 36 40 41 42 44 ]
CPU P-States [ 8 22 27 29 32 33 35 36 37 40 41 42 (44) ]
CPU P-States [ 8 22 27 29 32 33 35 36 37 (40) 41 42 43 44 ]
CPU P-States [ (8) 22 27 29 32 33 34 35 36 37 40 41 42 43 44 ]

 

[VioletDragon]

ok, all done (didn't test it though, should I?)

Looks good now.

 

[bartek.chlebek]

I've tested anyway and edited the post.
Whew

I suppose USB is more work, I'll need windows (luckily I have) to match ports with their numbers or something like that?

 

[VioletDragon]

I've tested anyway and edited the post.
Whew

I suppose USB is more work, I'll need windows (luckily I have) to match ports with their numbers or something like that?

Nope not at all. You can use ioreg with a USB 3 hub as it mounts as a USB 2 hub which is easier.

 

[bartek.chlebek]

How can I do that?
Sorry for bugging you so much. You're being really helpful.