- Joined
- Sep 11, 2019
- Messages
- 138
- Motherboard
- ASUS ROG STRIX z390-E Gaming
- CPU
- i9-9900K
- Graphics
- 5700 XT
- Mac
- Classic Mac
- Mobile Phone
Hi everyone! I hope you're well. Pinging @pastrychef @nch107 @iDrakus @ModMike @Gigamaxx
I wanted to say thank you for the help you all gave me back in November. I was the guy with the bummer CPU that ended up costing us days of troubleshooting. I'm starting the process of bumping my build up to 10.15.3 and was hoping to get your advice on that.
I never did get to the point where I was confident enough in my EFI to share it.
To jog your memory: I started with modmike's EFI - spoiler - everything should've worked there, but didn't because of my bad CPU. We spent the next several days working on a fresh EFI for my build. Here's a link to the thread with the last EFI we built:
This was right before iDrakus chimed in saying that Modmike's EFI worked with his build after updating a couple kexts. That's when I went down the hardware rabbit hole and found out that it was my 9700k - it was the very first production run and a year old last November. I don't know this to be factual, but I've read early 9700k have had issues.
Here's iDrakus' updated version of modmike's EFI:
I think I ended up using that because we swapped it out during testing. When I swapped the CPU and had things working, I walked away. Ha! I don't think I'm running the EFI we built, but I'd like to change that.
Quick recap of pertinent info:
9900k
asus rog strix z390-e
RX 5700 XT
We had decided to set it up as iMac 19,1 with the iGPU enabled based on iDrakus' feedback.
I added an unnecessary layer of complexity by trying to have an Nvidia card in the computer at the same time - it didn't see to cause any problems, but I put together a different PC for gaming. This is just going to be a dedicated Mac without the need for dual boot. I snagged an external drive and did a carbon copy cloner backup... so I'm ready to break things.
1 - Are you aware of a working EFI for macOS 10.15.3 and my hardware yet? I don't have to start fresh, but I like clean and stable stuff.
2 - Would you be willing to work with me on the EFI again to get everything as up-to-date as possible?
3 - I'm always an advocate for starting clean, or even with the EFI that we worked on (because it started clean), and going from there, yes?
4 - I assume there's been significant changes since November, but I could be wrong. Where should I start to update my EFI?
5 - Any stability issues with 10.15.3? Does it seem like it's worth putting in the effort to get there right now?
6 - I'm currently on 10.15.1. Can I go straight to 10.15.3 with the updated EFI, or are there other steps?
I would really like to do an updated post with my build and this EFI. I'm sorry I didn't get to that point last time. I plan to eventually do a YouTube video showing off the build - and I'd like to link back here because this community is awesome.
On a related note: can we change my username to @burlimonster? That's the name of my YouTube stuff, so I'd love for it to match.
Thank you again, pastrychef et al. I appreciate all of you and the kindness you show to the community!!!
Burlimonster (piano08man)
I wanted to say thank you for the help you all gave me back in November. I was the guy with the bummer CPU that ended up costing us days of troubleshooting. I'm starting the process of bumping my build up to 10.15.3 and was hoping to get your advice on that.
I never did get to the point where I was confident enough in my EFI to share it.
To jog your memory: I started with modmike's EFI - spoiler - everything should've worked there, but didn't because of my bad CPU. We spent the next several days working on a fresh EFI for my build. Here's a link to the thread with the last EFI we built:
[Solved] 10.15.1, updated kexts, pastrychef-verified EFI, 5700XT freezes in OS
I had to leave mine as iMacPro for it to keep the decoder supported - as soon as i switched to imac19,1 - which is my processor equivalent, it said decoder failed. Ok thanks.
www.tonymacx86.com
This was right before iDrakus chimed in saying that Modmike's EFI worked with his build after updating a couple kexts. That's when I went down the hardware rabbit hole and found out that it was my 9700k - it was the very first production run and a year old last November. I don't know this to be factual, but I've read early 9700k have had issues.
Here's iDrakus' updated version of modmike's EFI:
The everything works Asus Z390-I Gaming * i7-8700K * SAPPHIRE NITRO+ Radeon RX Vega 64 Build
Taking a break now isn't a bad idea. It's not a lost cause and when you decide to get back to it then double check your graphic bios settings. Advanced Items > System Agent (SA) Graphics Configuration > DVMT Pre-Allocated > 128 I have also tried: Primary Display: PEG iGPU Multi Monitor...
www.tonymacx86.com
I think I ended up using that because we swapped it out during testing. When I swapped the CPU and had things working, I walked away. Ha! I don't think I'm running the EFI we built, but I'd like to change that.
Quick recap of pertinent info:
9900k
asus rog strix z390-e
RX 5700 XT
We had decided to set it up as iMac 19,1 with the iGPU enabled based on iDrakus' feedback.
I added an unnecessary layer of complexity by trying to have an Nvidia card in the computer at the same time - it didn't see to cause any problems, but I put together a different PC for gaming. This is just going to be a dedicated Mac without the need for dual boot. I snagged an external drive and did a carbon copy cloner backup... so I'm ready to break things.
1 - Are you aware of a working EFI for macOS 10.15.3 and my hardware yet? I don't have to start fresh, but I like clean and stable stuff.
2 - Would you be willing to work with me on the EFI again to get everything as up-to-date as possible?
3 - I'm always an advocate for starting clean, or even with the EFI that we worked on (because it started clean), and going from there, yes?
4 - I assume there's been significant changes since November, but I could be wrong. Where should I start to update my EFI?
5 - Any stability issues with 10.15.3? Does it seem like it's worth putting in the effort to get there right now?
6 - I'm currently on 10.15.1. Can I go straight to 10.15.3 with the updated EFI, or are there other steps?
I would really like to do an updated post with my build and this EFI. I'm sorry I didn't get to that point last time. I plan to eventually do a YouTube video showing off the build - and I'd like to link back here because this community is awesome.
On a related note: can we change my username to @burlimonster? That's the name of my YouTube stuff, so I'd love for it to match.
Thank you again, pastrychef et al. I appreciate all of you and the kindness you show to the community!!!
Burlimonster (piano08man)
Last edited: