UniBeast: Install macOS Sierra on Any Supported Intel-based PC

[Feartech]

hello every one
i have problem i dont know how to fix it
and it think i tried everything

i tried
1- 0x67
2- OsxAptioFixDrv
3- tried clover from official site
4- tried unibeast 7.0.1

and i did change bios settings like provided in here

nothing is booting to install
pictures included

1-

2-

3-

my pc info:
z97x gaming 3 with last update of bios
i7 4790k
gtx 780 ti super oc
12gb ram / 8gb hyperx / 4gb Apacer ram
360gb hdd <- trying to install here
2TB hdd <- files
500gb hdd <- files
120gb ssd <- windows 10

i have el capitan working just fine without any problem but i want to change to sierra

how ti fix this ?

https://www.tonymacx86.com/threads/...acpro3-1-macpro4-1-system-definitions.200868/

 

[VioletDragon]

hello every one
i have problem i dont know how to fix it
and it think i tried everything

i tried
1- 0x67
2- OsxAptioFixDrv
3- tried clover from official site
4- tried unibeast 7.0.1

and i did change bios settings like provided in here

nothing is booting to install
pictures included

1-

2-

3-

my pc info:
z97x gaming 3 with last update of bios
i7 4790k
gtx 780 ti super oc
12gb ram / 8gb hyperx / 4gb Apacer ram
360gb hdd <- trying to install here
2TB hdd <- files
500gb hdd <- files
120gb ssd <- windows 10

i have el capitan working just fine without any problem but i want to change to sierra

how ti fix this ?

Use iMac 14,2.

 

[alabhawi]

Use iMac 14,2.

yeah i will thanks

 

[alabhawi]

Use iMac 14,2.

thanks guys

its working just fine
and there is update 10.12.1
should i update ?

 

[VioletDragon]

thanks guys

its working just fine
and there is update 10.12.1
should i update ?

Should be fine. Just make sure you boot without cache after updating.

 

[alabhawi]

Should be fine. Just make sure you boot without cache after updating.

ok and thanks again

 

[alabhawi]

I got anthor problem after install multibest UEFI bootloader I can't boot without usb
how do I fix this one

EDIT : I got this fixed by adding kext to EFI

 

[Tails4u2nv]

What kind of boot USB you made, do you made a legacy one ?

https://www.tonymacx86.com/threads/...-ud3r-rev-2-and-fixed-my-no-shut-down.204492/
Check here for the latest update of the various things i've tried & where i'm stuck at

 

[mandowar]

Hi everyone,

I'm trying to install Sierra on my gaming pc, first experience in the "Hackintosh Endeavour".

I managed to create the USB and reset BIOS to optimized defaults.

Then I checked
1. To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up
2. Load Optimized Defaults <- Done
3. If your CPU supports VT-d, disable it
4. If your system has CFG-Lock, disable it
5. If your system has Secure Boot Mode, disable it <-done
6. Set OS Type to Other OS <-done
7. If your system has IO SerialPort, disable it <- can't find this feature
8. Set XHCI Handoff to Enabled <- can't find this feature
9. If you have a 6 series or x58 system with AWARD BIOS, disable USB 3.0 <-not sure about this one,
10. Save and exit.


The install process stops here (attached image)

Anyone familiar with ASUS bios app? What should I check?

 

[Rorizm]

Hey does anyone know to revert the USB back to normal? I want to be able to use it again but when I plug it in on Windows 10 it just shows "EFI" and only 188mb free out of 196mb. How do i get all 32gb back?? Thanks