Contribute
Register

toshiba satellite A500 1F4

Status
Not open for further replies.
hi :cptscruffy
I think geforce 310 it will work fine in mac no need driver only graphic enable on apple.boot
for windows i update to 266.58 and some time crash

for all:
my internal mic not working i try use all version of voodoohda put still not working
and it is high definition
 
update to 10.6.7 use combo every thing OK only reinstall network kext
 
hi my friend
i have a question
you said :
in order to boot without CD we need multibeast 1.1.0
where i can find it because i have the lastest version 3.8.0 and it does not have the Kext section in the installation menu
do i have to use the multibeast 1.1.0??
notes
my bios version is 1.5
my mac is 10.6.6
i have Toshiba A500-1f4
i need the cd every time i want to use the system
 
ok i will try
but i have tried to update my bios while i was on windows 7 and it didn't work
and after some searching i found out that i need windows XP and this is very hard to do because of the drivers and stuff will it work on windows 7
 
setokaiba1411 said:
ok i will try
but i have tried to update my bios while i was on windows 7 and it didn't work
and after some searching i found out that i need windows XP and this is very hard to do because of the drivers and stuff will it work on windows 7
Click to expand...

the Bios can be update from windows7 without any problem , try to remove mac
and update bios after that reinstall mac or you can set windows driver active
through (Command prompt )and update
 
Hi my Friend fatih75 Sorry for this late replay but i was busy
any way
now i updated my bios to 2.0
and i am running a 10.6.6 snow leopard
AND MY BIOS is ON DEFAULT
I COULDN'T find this LegacyAppleRTC in multibeast 3.8.0 so i continued with out it
and restarted no luck i still need a cd or a usb
then i tried the link you gave me about mark the partion as active still no luck but i nohticed some thing
his partiion type is HFS+ and mine is GPT SEE
------------------------HIS-----------------------
fdisk: 1> print
Disk: /dev/disk0 geometry: 121601/255/63 [1953523055 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
————————————————————————
1: AF 0 1 1 – 1023 254 63 [ 63 - 977027392] HFS+
*2: 07 1023 254 63 – 1023 254 63 [ 977027499 - 976495527] NTFS
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
fdisk: 1>
------------------------his-------------------

AND MINE IS
------------------------------------------Mine-------------------------
Enter 'help' for information
fdisk: 1> print
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
*1: EE 1023 254 63 - 1023 254 63 [ 1 - 976773167] GPT
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
fdisk: 1>
----------------------------------------mine---------------------------

and he have two partions because he have duel boot and i am noot
SO what to do and sorry for disturbing
 
hi setokaiba1411
LegacyAppleRTC is replaced by ElliottForceLegacyRTC.kext in multibeast 2.8 and both of them working and it use to (Prevents a CMOS reset on reboot without a DSDT.) so it is very important for reboot .

try install ElliottForceLegacyRTC.kext and don't install this(VoodooHDA 0.2.56,
Voodoo PS/2 Controller ,Hnak's AppleIntelE1000e Ethernet) until you boot from HHD.
always reboot if first time KP reboot agian.

if your not dual booting so you don't need step 4 ,your partition is GUID put the other is MBR(master boot record)
my laptop 2 partition is MBR run SNOW and win7 and external hhd is GUID run SNOW

if kernel panic please can you attach photo of KP
 
fatih75 said:
hi setokaiba1411
LegacyAppleRTC is replaced by ElliottForceLegacyRTC.kext in multibeast 2.8 and both of them working and it use to (Prevents a CMOS reset on reboot without a DSDT.) so it is very important for reboot .

try install ElliottForceLegacyRTC.kext and don't install this(VoodooHDA 0.2.56,
Voodoo PS/2 Controller ,Hnak's AppleIntelE1000e Ethernet) until you boot from HHD.
always reboot if first time KP reboot agian.

if your not dual booting so you don't need step 4 ,your partition is GUID put the other is MBR(master boot record)
my laptop 2 partition is MBR run SNOW and win7 and external hhd is GUID run SNOW

if kernel panic please can you attach photo of KP
Click to expand...
hi it diddnt work
do i have to do a clean installtion then try to install multibast with the settinngs you gave me?
And What your Bios Settings
And My internal Cd rom is brocken and i am using an external one does that affect booting from harddisk
and how about lion with multibeast4.0.1
 
hi faith75
everything you game so far didn't work
Lets start from the beginning

Toshiba A500-1F4
bios 2.0 Default
Hard drive 500gb WD blue
Ram Stock
DVD Drive Is not functional but i have an external one
now i want to install snow leopard and to boot without the CD OR USB

i noticed something strange
the laptop wont boot with out a CD or a loading screen
i mean chameleon is 100% installed on the internal hard drive BUT THE LAPTOP WONT USE IT EXCEPT if i put a CD that make the system load some files like WIN7 Install DVD
after i put the DVD it give me PRESS ANY KEY TO BOOT FROM CD OR DVD if i don't press any thing then the chameleon will work but if i remove the DVD it wont
SO what to do??
 
hi setokaiba1411
first of all format your laptop to MBR not GUID
this is my trick when first boot from hard disk dual boot windows install first and after i install snow as previous procedure reboot from windows dvd and repair startup when windows run install easybcd
add new entry snow MBR not EFI

i hope this will help
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top