TipToe MacMini z370n wifi i5-8400

[lgchack]

nice build.I have H60 case.i3-8100 mobo:z370n-wifi bois version:F1 .I have some trouble with sound,just no voice

 

[qinkangdeid]

thank you.I chose the same configuration as you . When I want to load the BIOS profiles.I got this information：the file（ bios.zip）can't load. Bios version
is different. What is your BIOS version? the second pic is my bios version.

 

[qinkangdeid]

I upgraded the BIOS to "F3".Good situation is that your bios file can be loaded.But when I want to install the system.My screen shows prohibited icons.Like the picture below.EFI folder has been replaced with your file into the USB installer.Is there anything else I need to set up? i am a Noob.So I don't know how to do it.Can you help me think of a solution?thanks.

 

[nbkkb7x]

Man, this is the exact MOBO & CPU specs I'm planning. I'll post when I'm done with the build. Thanks!

 

[ljh8088]

Thank you for sharing it !. i also had the same motherboard with you, could you tell me how to setting the bios?
i try to load your Bios.zip , but i show 'Profile was created by different Bios version'.
My bios version is 'F2'

 

[qinkangdeid]

Thank you for sharing it !. i also had the same motherboard with you, could you tell me how to setting the bios?
i try to load your Bios.zip , but i show 'Profile was created by different Bios version'.
My bios version is 'F2'

I solved it. You need to update your BIOS to "F3" version. After this is done you can load the bios.zip file. Note: The EFI folder here can only be used with the 10.13.3 system. I tested ： 10.13.4 is not available.I think we need to update some files on the new system version

 

[ljh8088]

I solved it. You need to update your BIOS to "F3" version. After this is done you can load the bios.zip file. Note: The EFI folder here can only be used with the 10.13.3 system. I tested ： 10.13.4 is not available.I think we need to update some files on the new system version

thank you for your help. I am going to try .

 

[ljh8088]

I solved it. You need to update your BIOS to "F3" version. After this is done you can load the bios.zip file. Note: The EFI folder here can only be used with the 10.13.3 system. I tested ： 10.13.4 is not available.I think we need to update some files on the new system version

how did you update the bios ? i try update with @BIOS (on windows7), but get the 'flash bios failed'.

 

[pbreaker80]

@ TipToe, got the same build as you, Can you upload EFI after updating to 10.13.4 and is everything working USB-C, sleep/wake??

 

[valherru]

It's only 10mm thickness is suitable. Maybe I should use glue ))

After all I made compromise with Streacom case and for side fans on one side where is not possible put more than 10mm this one https://noctua.at/en/products/fan/nf-a4x10-flx and for other side probably add its 4020 PWM version. With LNA adapters its around 12 dB which is OK for me. If you can sqeeze there 15mm, there is also very nice 6015 silent version from Sunon.