- Joined
- Dec 15, 2013
- Messages
- 1
- Motherboard
- Gigabyte GA-Z97M-D3H
- CPU
- 3,2 GHz Intel Core i5
- Graphics
- Intel HD Graphics 4600
- Mac
- Mobile Phone
Hi everyone!
First, I would like to say I'm new in this forum, this is my first post and I'm from Hungary. English is a foreign language for me, so sorry for any mistakes.
In the following I will give you some details about my Hackintosh recent Hackintosh build. I've already build some other PC-s, but this is my first Hackintosh. The build was relative easy, everything is working fine now.
THE HARDWARE:
Case: Bitfenix Pandora Core (no window, no mini display at front)
Power supply: beQuiet! PurePower 400W
Motherboard: Gigabyte Z97M-D3H
CPU: Intel Core i5-4460
RAM: Crucial 16GB Tactical DDR3 1600 MHz (2*8GB kit)
Graphics: Intel HD 4600 (no discrete GPU)
SSD: Samsung 850 evo
Network: build in ethernet + TP-Link TL-WDN4800
+: Firewire card + back panel extra USB headers
BIOS CONFIGURATION:
Load factory defaults
X.M.P Memory profile: Profile 1
VT-d disabled
THE INSTALLATION:
I've installed using an 8GB Kingston USB3.0 flash drive, prepared with UniBeast.
I had to boot the installer with -v flag cause there is no discrete Graphics Card present.
After the installation, I also had to boot with -v to reach the welcome screen.
MULTIBEAST:
DSDT Free
Realtek ALC892
3rd Party SATA
TRIM Enabler 10.10.3 TRIM Patch
FakeSMC v6.14.1364
RealtekRTL8111 v1.2.3
Chimera v4.1.0
Basic Boot Options
Generate CPU Staties
Hibernate Mode - Desktop
Kext Dev Mode
Use KernelCache
After a reboot everything is working fine.
I've attached some photos about the config.
At last, but not at least I would like to say Thanks to the tonymacx86 page and other forumers.
First, I would like to say I'm new in this forum, this is my first post and I'm from Hungary. English is a foreign language for me, so sorry for any mistakes.
In the following I will give you some details about my Hackintosh recent Hackintosh build. I've already build some other PC-s, but this is my first Hackintosh. The build was relative easy, everything is working fine now.
THE HARDWARE:
Case: Bitfenix Pandora Core (no window, no mini display at front)
Power supply: beQuiet! PurePower 400W
Motherboard: Gigabyte Z97M-D3H
CPU: Intel Core i5-4460
RAM: Crucial 16GB Tactical DDR3 1600 MHz (2*8GB kit)
Graphics: Intel HD 4600 (no discrete GPU)
SSD: Samsung 850 evo
Network: build in ethernet + TP-Link TL-WDN4800
+: Firewire card + back panel extra USB headers
BIOS CONFIGURATION:
Load factory defaults
X.M.P Memory profile: Profile 1
VT-d disabled
THE INSTALLATION:
I've installed using an 8GB Kingston USB3.0 flash drive, prepared with UniBeast.
I had to boot the installer with -v flag cause there is no discrete Graphics Card present.
After the installation, I also had to boot with -v to reach the welcome screen.
MULTIBEAST:
DSDT Free
Realtek ALC892
3rd Party SATA
TRIM Enabler 10.10.3 TRIM Patch
FakeSMC v6.14.1364
RealtekRTL8111 v1.2.3
Chimera v4.1.0
Basic Boot Options
Generate CPU Staties
Hibernate Mode - Desktop
Kext Dev Mode
Use KernelCache
After a reboot everything is working fine.
I've attached some photos about the config.
At last, but not at least I would like to say Thanks to the tonymacx86 page and other forumers.
Last edited by a moderator: