- Joined
- Mar 3, 2013
- Messages
- 9
- Motherboard
- Intel
- CPU
- i5 4690k
- Graphics
- Hd4600 + GT 620
- Mac
- Classic Mac
- Mobile Phone
duardito's Build: GA-Z97MX-GAMING 5 / i5-4690K / ASUS Strix GTX 960
Components
GA-Z97MX-GAMING 5 motherboard
http://www.amazon.com/gp/product/B00K8HNGXS/
Intel Core i5-4690K Devils Canyon
http://www.amazon.com/dp/B00KPRWB9G/
Asus Strix GTX 960
http://www.amazon.com/dp/B00S9SGMZM/
16 GB ram and samsung 256 ssd drive.
Comments
You can follow these threads as my build is the same as their's:
http://www.tonymacx86.com/user-buil...i5-4690k-integrated-hd4600-runs-flawless.html
http://www.tonymacx86.com/user-buil...ng-gt-i7-4790k-nvidia-geforce-gtx-970-sc.html
My bios setup is as follows (I am using F5 bios version)"
1. Load optimized settings
2. Set the initial display output to where you nvidia car is attached, there is no need to use integrated card.
3. Set VT-d to Disabled
4. Set Extreme Memory Profile to Profile 1
5. Save and exit bios.
Boot your Yosemite 10.10.1, enter the following boot args: -v -x nv_disable=1.
When the installer shows first screen, go to disk utility and:
1. Click on your hard drive on the left
2. Click on the partition tab
3. Select 1 partition
4. Name the drive “Yosemite” (no quotes)
5. Click options and select GUID
6. Select Mac OS extended (Journaled)
7. Hit apply
8. Hit partition
9. After you partition your hard drive close the disk utility
10. When you are asked where to install, select the Yosemite hard drive and select continue.
When the process is finished , reboot with :
-v nv_disable=1
follow installation process, and, when you get, for the first time, your system up, use MultiBeast:
Quick Start Tab, Check mark "DSDT-Free"
Drivers Tab, Audio:Check mark. “ALC1150” (This is the audio driver for the gaming 5)
Drivers Tab, Disk:Check mark
Drivers Tab, Misc:Check mark
Apply MultiBeast options and reboot with:
-v nv_disable=1
When you reboot and get network working, update to Yosemite 10.10.3 and reboot again with:
-v nv_disable=1
Install nVidia drivers, reboot with -v nv_disable=1, use web drivers , afterwards reboot with no flags. If you get black screen, reboot with-v nv_disable=1, and follow this thread (apply kext file):
http://www.tonymacx86.com/yosemite-...creen-after-10-10-3-update-6.html#post1018252
and that's all, system is running fine.
Of course, you must use latest MultiBeast to apply TRIM and Audio driver.
Components
GA-Z97MX-GAMING 5 motherboard
http://www.amazon.com/gp/product/B00K8HNGXS/
Intel Core i5-4690K Devils Canyon
http://www.amazon.com/dp/B00KPRWB9G/
Asus Strix GTX 960
http://www.amazon.com/dp/B00S9SGMZM/
16 GB ram and samsung 256 ssd drive.
Comments
You can follow these threads as my build is the same as their's:
http://www.tonymacx86.com/user-buil...i5-4690k-integrated-hd4600-runs-flawless.html
http://www.tonymacx86.com/user-buil...ng-gt-i7-4790k-nvidia-geforce-gtx-970-sc.html
My bios setup is as follows (I am using F5 bios version)"
1. Load optimized settings
2. Set the initial display output to where you nvidia car is attached, there is no need to use integrated card.
3. Set VT-d to Disabled
4. Set Extreme Memory Profile to Profile 1
5. Save and exit bios.
Boot your Yosemite 10.10.1, enter the following boot args: -v -x nv_disable=1.
When the installer shows first screen, go to disk utility and:
1. Click on your hard drive on the left
2. Click on the partition tab
3. Select 1 partition
4. Name the drive “Yosemite” (no quotes)
5. Click options and select GUID
6. Select Mac OS extended (Journaled)
7. Hit apply
8. Hit partition
9. After you partition your hard drive close the disk utility
10. When you are asked where to install, select the Yosemite hard drive and select continue.
When the process is finished , reboot with :
-v nv_disable=1
follow installation process, and, when you get, for the first time, your system up, use MultiBeast:
Quick Start Tab, Check mark "DSDT-Free"
Drivers Tab, Audio:Check mark. “ALC1150” (This is the audio driver for the gaming 5)
Drivers Tab, Disk:Check mark
1. “3rd Part SATA” at the very top (Should be selected by default)
2. Extend the “Trim Enabler” and check mark “10.10.0 Trim Pack”.
Drivers tab, Network:Check expand “Atheros” and then select “AtherosE2200Ethernet V1.0.2”2. Extend the “Trim Enabler” and check mark “10.10.0 Trim Pack”.
Drivers Tab, Misc:Check mark
1. “3rd Party SATA”
2. “FakeSMC v6.11.1328 Plugings,
3. FakeSMC v6.11.1328 HWMonitor Application”
4. “USB 3.0-Universal”.
Customize Tab, Boot Options:Check to see if these are Marked2. “FakeSMC v6.11.1328 Plugings,
3. FakeSMC v6.11.1328 HWMonitor Application”
4. “USB 3.0-Universal”.
1. “Basic Boot Options
2. Hibernate Mode-Desktop
3. Kext Dev Mode
4. Use Kernel Cache
2. Hibernate Mode-Desktop
3. Kext Dev Mode
4. Use Kernel Cache
Apply MultiBeast options and reboot with:
-v nv_disable=1
When you reboot and get network working, update to Yosemite 10.10.3 and reboot again with:
-v nv_disable=1
Install nVidia drivers, reboot with -v nv_disable=1, use web drivers , afterwards reboot with no flags. If you get black screen, reboot with-v nv_disable=1, and follow this thread (apply kext file):
http://www.tonymacx86.com/yosemite-...creen-after-10-10-3-update-6.html#post1018252
and that's all, system is running fine.
Of course, you must use latest MultiBeast to apply TRIM and Audio driver.